Skip to content

Products. 11 families, 57 lines.

Every product family made by Gopani in Gujarat, India. Filter by family, industry or micron rating, or search by product name or part number.

String Wound Filter Cartridges

Clarywound

Clarywound wound depth filter cartridges. 3X and Ultra are wound in polypropylene. Extreme is wound in polypropylene, cotton or glass fibre on polypropylene or stainless steel cores. Extreme Bico uses Bico media, rated to 120 °C. GF is glass fibre on a stainless steel core, rated up to 350 °C.

Meltblown Filter Cartridges

RO Protect, ClaryNira

RO Protect meltblown depth filter cartridges in thermally bonded polypropylene, made without resin binders, from 0.5 to 25 µm. Five grades: Extreme, Prime, Eco Plus, Eco and Ultra. ClaryNira adds Microban® technology.

Pleated Filter Cartridges

Clarypleat, Kryticalpleat

Kryticalpleat and Clarypleat pleated filter cartridges. Kryticalpleat is the range for critical applications, made with a higher grade of membrane: Kryticalpleat PES for sterilizing filtration, every cartridge integrity tested, and Kryticalpleat All Fluoropolymer with every wetted part in fluoropolymer. Clarypleat PES and PTFE are membrane cartridges on polypropylene hardware for general process and sterilizing-grade duty, and Clarypleat HE and NE are polypropylene pleats for industrial liquids.

Kryticalpleat PES

0.1 to 1 µmto 40"

Sterilizing-grade filter cartridge for critical applications, made with a higher grade of PES membrane. Every cartridge integrity tested before it ships.

Kryticalpleat All Fluoropolymer

0.2 to 1.0 µmto 160 °C

Hydrophobic PTFE membrane with fluoropolymer supports, cage, core and end caps, hot melt welded, for aggressive chemicals and gases.

Group of Clarypleat PES pleated membrane filter cartridges, side by side

Clarypleat PES

0.1 to 1 µmASTM F838 retention

Sterilizing-grade asymmetric PES membrane for buffers, media, intermediates and final aqueous formulations.

Group of Clarypleat PTFE 20 inch pleated filter cartridges, side by side

Clarypleat PTFE

0.1 to 5 µmto 80 °C

Hydrophobic PTFE membrane on polypropylene hardware for air and gas, tank and fermentor vents, and solvent filtration.

Clarypleat HE pleated filter cartridges, 10 inch and 30 inch, front view

Clarypleat HE

0.22 to 50 µmto 80 °C

All-polypropylene pleated filter cartridge with no binder or surfactant, as a pre-filter or final filter for industrial liquids and food contact.

Clarypleat NE pleated filter cartridges, 10, 20 and 30 inch, front view

Clarypleat NE

5 to 100 µmto 55 °C

Nominal-rated pleated filter cartridge in polypropylene or polyester media for raw water and pre-filtration, standard or jumbo.

Clarypleat CPU

1, 4, 10 µmto 82 °C

Pleated polypropylene condensate polishing filter cartridges, absolute rated and backwashable, 70 mm OD, 60" and 70".

Clarypleat PVDF 10 inch pleated filter cartridge, shown at a diagonal

Clarypleat PVDF

0.1, 0.22, 0.45 µmto 80 °C

Hydrophilic PVDF pre-filter and final membrane on polypropylene hardware, OD 69 mm, 10" to 40".

Clarypleat Nylon pleated filter cartridges, 10 inch and 20 inch, shown at a diagonal

Clarypleat Nylon

0.2, 0.45 µmto 80 °C

Naturally hydrophilic nylon 6,6 membrane on polypropylene hardware, each filter integrity tested, 5" to 30".

Clarypleat 5000 40 inch pleated filter cartridge, from the top

Clarypleat 5000

1, 2, 5, 10 µmto 80 °C

Pleated glass fibre or polypropylene filter cartridges, 30" and 40", OD 63 mm, for brine, oily water, solvents and fuels.

Running another make today?

Send the part number from the filter cartridge, its box or the housing nameplate, with the fluid and the micron rating. We will match a Gopani replacement to your housing.

Capsule Filters

Clarypleat

Clarypleat PES and PTFE capsule filters: the membrane sealed in a polypropylene shell, for laboratory, pilot and small batch filtration and for gas and vents, with no housing to clean.

High Flow Filter Cartridges

RO Protect HF, ClaryFlow Big Buddy

Six high flow variants in two formats. RO Protect HF: a 6 inch (152 mm) pleated element with inside-to-outside flow, 20" to 60", up to 1900 LPM of water through one 60" filter cartridge, in pleated polypropylene, depth pleated polypropylene, glass micro-fibre or polyester media. ClaryFlow Big Buddy: a 30" cartridge with a dual O-ring, pleated up to 150 gpm or meltblown up to 100 gpm. Gopani makes replacement high flow cartridges for housings built for other makes, matched to the part number you run.

Sintered Metal Filter Cartridges

Clarysynt, Clarysparge

Clarysynt powder sintered filter cartridges and tubes in SS 316L, Clarysynt replacement elements made to the size and connection of the element you run now, Clarysynt culinary steam elements, Clarysparge stones, flow restrictors, fluidizing filters, sensor probe protection, pneumatic silencers, compressed air and gas filters, and Clarysynt multilayer sintered mesh, for gas, steam, hot liquids and powders.

Two Clarysynt powder sintered stainless steel filter cartridges, one with a threaded end and one with a double O-ring end

Clarysynt powder sintered

0.2 to 25 µm15 to 25 bar forward

Powder sintered SS 316L filter cartridges and filter tubes, -192 to 900 °C depending on the seal, in 50 to 75 mm diameters.

Clarysynt powder sintered stainless steel candle with a threaded end fitting and hex nut, the end cap engraved with the Gopani part number

Clarysynt replacement elements

0.2 to 25 µmOD 50 to 75 mm, SS 316L or Hastelloy

Powder sintered filter cartridges, candles, tubes and discs made to the size and end connection of the element you run now, for the housings and systems already installed, whoever built them.

Clarysynt powdered sintered steam filter cartridge with a threaded end and red O-rings

Clarysynt culinary steam

Made to order

1, 5, 25 micron98% for steam

Powder sintered SS 316L steam elements for process, clean and culinary steam, regenerable, with Clary-T Steam housings.

Five Clarysparge sintered carbonation stones with tri-clamp ferrules, standing

Clarysparge carbonation stones

SS 316L, Hastelloy1" or 1.5" TC tank connection

Sintered SS 316L or Hastelloy stones for carbonation, oxygen dosing, sparging and hydrogenation.

Principle diagram: gas passes through a porous metal element held in a sleeve, from the higher pressure inlet to the outlet at a set flow and lower pressure

Flow restrictors

Made to flowyour gas, pressure and connection

Sintered metal gas flow restrictors made to the flow, gas, pressure and connection you specify.

Principle diagram: gas enters below a porous metal plate, rises evenly through it into the powder bed, and the fluidised powder flows out

Fluidizing filters

0.1 to 120 micronoperable at 600 °C

Porous metal fluidizers for metal and chemical powders, gasification, food, pharma and cement.

Principle diagram: a porous metal cap around the sensor probe lets gas or liquid reach the sensor and keeps particles out

Sensor probe protection

Sintered 316Lstainless steel powder

Sintered 316L stainless steel housings that protect temperature, humidity, gas, pH and ORP sensor probes.

Principle diagram: exhaust air from the port enters the porous metal element and diffuses through its wall to atmosphere

Pneumatic silencers and mufflers

Sintered stainless steelfits onto the exhaust port

Sintered stainless steel air mufflers and silencers that vent pneumatic exhaust to atmosphere with less noise.

Principle diagram: gas flows from the inlet through a porous metal element, which retains particles, to the outlet

High purity and high pressure compressed air and gas filters

Down to 0.01 µmup to 40 bar, up to 500 °C

Sintered 316L stainless steel filters for compressed air and gas in analyzers, sampling and instrumentation.

Clarysynt multilayer sintered mesh filter cartridge, pleated, with stainless steel end cap and support bands

Clarysynt multilayer sintered mesh

Sintered meshfor cleanable filtration systems

Pleated multilayer sintered metal mesh filter cartridges for reusable or cleanable filtration systems.

Filter Housings and Systems

Clary-T, Polyfilt, Plastofilt, ClarySEA

Clary-T stainless steel housings for filter cartridges, bags, high flow elements, vents, strainers and lenticular modules; Polyfilt uPVC and ClarySEA FRP housings for corrosive service; Plastofilt polypropylene housings; and skid-mounted systems.

Clary-T CF Cartridge filter housings

0.7 MPa1/2" to 12" connections

Stainless steel filter cartridge housings in five configurations and nine materials, hydrostatically tested before dispatch.

Two Clary-T sanitary filter housings on tri-leg stands, one tall and one short

Clary-T Sanitary Filter Housings

0.7 MPa65 °C, CIP and SIP

Sanitary housings with a push and twist Code-7 bayonet, sloped tube sheet and orbital welds, for pharma, food and biotech.

Clary-T Strainers Strainer filter housings

Up to 500 m³/hrdown to 23 micron

Single, multi, inline, duplex, back washable and dual stage strainer housings in steel or FRP.

Clary-T HF horizontal stainless steel high flow filter housing

Clary-T HF High flow filter housings

6" SOE, 20" to 60"4" to 20" connections

Horizontal or vertical stainless steel housings for 6 inch SOE high flow filter cartridges.

Clary-T Vent

Ra ≤ 0.4 µm-25 to 135 °C

Crevice free vent filter housings, standard, jacketed or jacketed with a temperature controller.

Clary-T BF stainless steel bag filter housings: a multi-bag housing beside a single bag housing

Clary-T BF Bag filter housings

0.7 MPa (7 bar), 65 °C2 to 39 bags

Single and multi-bag stainless steel housings with a supporting cage, top or side entry, up to 600 m³/hr. Standard rating 0.7 MPa (7 bar) and 65 °C. Higher pressure and temperature ratings on request.

Clary-T LF

0.7 MPa1 to 4 modules

Stainless steel housings for 12" and 16" lenticular depth modules, supplied ready to use.

ClarySEA FRP housing

100 m³/hr18 × 40" filter cartridges

Fibre reinforced plastic filter cartridge housing for seawater and corrosive fluids, to ASME Section X.

Polyfilt CF

Up to 54 m³/hr6 bar, 4 to 60 °C

Non-metallic multi-cartridge housing from the Polyfilt uPVC range, for corrosive service, 10" to 40" cartridges.

Polyfilt BF

18 or 30 m³/hr6 bar, 4 to 60 °C

Non-metallic bag filter housing from the Polyfilt uPVC range for one Size 1 or Size 2 bag.

Polyfilt HF

40 m³/hr6 bar, 4 to 45 °C

Non-metallic housing for a single 6" × 60" high flow SOE filter cartridge, with 3" Victaulic ends.

Plastofilt CF

Up to 8 m³/hr8 bar, 4 to 70 °C

Virgin polypropylene housing for one 10" or 20" filter cartridge, Slim or Jumbo, leak tested before delivery.

Plastofilt BF

Up to 10 m³/hr8 bar, 4 to 70 °C

Virgin polypropylene housing for one 4" × 10" or 4" × 20" flat collar bag, 1.5" BSP (F).

Catalyst recovery filter vessel in stainless steel, with a flanged top cover, process nozzles, support lugs and a conical bottom outlet

Catalyst recovery systems

Pd, Pt, Rh, Ru, Raney Nisingle pass, closed circuit

Closed-circuit filtration on backwashable sintered metal elements for Pd/C, Pt/C, Rh/C, ruthenium and Raney nickel, with heel filters and polishing stages.

Filter Bags

Claryfil

Claryfil felt bags in polypropylene or polyester, 1 to 200 µm, fully welded at bottom, seam and collar, and nylon monofilament mesh bags, for bulk solids ahead of filter cartridges.

Activated Carbon Filter Cartridges

ClaryCarb, Clarysorb

ClaryCarb carbon block filter cartridges for chlorine, taste and odour reduction, Clarycarb activated carbon grades for water, air and process duty, and Clarysorb oil adsorbing filter cartridges.

Syringe and Lab Filters

Uni.Q

Uni.Q syringe filters in five membranes and six diameters; Uni.Q 50, 50 mm PTFE vent filters and PES disc filters with a stepped hose barb, for carboys, small vessels and single-use assemblies; and sintered SS 316L solvent inlet filters for HPLC and UHPLC pumps.

Depth Filter Modules

Lenticular depth filter modules in cellulose, 12" and 16", for clarification ahead of membranes.

Send us your current specification.

Part number or micron rating, flow rate and fluid. We will reply with the matching Gopani filter cartridge, bag or housing and a quotation.

Request a quote
  • Request the catalogues

    Catalogues for every family, sent by email on request.

    Request catalogues
  • Talk to an application engineer

    WhatsApp or call, Monday to Saturday, IST.

    Contact us

Request a catalogue

Tell us who you are and where to send it. Our team emails the catalogue to you.

By sending this you agree to our Privacy notice.