Skip to content

Replacement filter cartridges

Replacement filter cartridges for the housings you already run. Built to your part number, sample or drawing.

Gopani makes wound, meltblown, pleated, membrane, high flow, sintered and bag elements in its own catalogue range, and builds replacements for housings designed for other makes to the part number, sample or drawing you send. An application engineer confirms the fit before you order.

How a replacement is matched

By type and construction: melt blown, string wound, pleated, membrane, high flow or sintered, then the outer diameter, length, end cap or fitting, seal and, for high flow, the flow direction and pleat style. For high flow filter cartridges, the replacement finder shows the Gopani variant to check first. For every other family, send the part number, a sample or a drawing. No Gopani document gives a part-number cross-reference, so every fit is confirmed against what you send before you order.

By family

What Gopani builds in each family

Standard sizes, end caps and seals from the current Gopani catalogue for each line. Sizes and connections outside these lists are quoted on request.

Outer diameter61, 63, 63.5 and 110 mm (jumbo); ID 27.5 mm
Lengths9.75" to 70", by line
End capsDOE; Clarywound Extreme also Code-7 (226) and SOE (222), fin or flat, and SOE T1, T2 and T3
SealsBuna-N, EPDM, silicone, FKM, or none
MediaPolypropylene, bleached cotton, glass fibre, nylon, polyester, Bico
CoresPolypropylene, glass filled PP, SS 304, 304L, 316, 316L, tinned steel

Source: Clarywound 3X, Extreme, Ultra, GF and Extreme Bico catalogues, 2026, as published on each line page.

Outer diameter61 and 63 mm standard, 110 mm jumbo; ID 27.5 to 28 mm
Lengths10" to 40", and to 70" in RO Protect Prime
End capsDOE without end cap; RO Protect Extreme, Prime and Eco Plus also Code-7 (226) and SOE (222), fin or flat
SealsBuna-N, EPDM, silicone, FKM, or none, by line
MediaThermally bonded polypropylene, no resin binders

Source: RO Protect Extreme, Prime, Eco Plus, Eco and Ultra catalogues, 2026, as published on each line page.

Outer diameter68 to 69 mm; 114 mm jumbo in Clarypleat NE; 63 mm in Clarypleat 5000
Lengths5" to 70", by line
End capsCode-7 (226) and SOE (222), fin or flat; DOE in Clarypleat HE and NE
SealsSilicone, EPDM, Viton (FKM), Buna-N, FEP encapsulated silicone, by line
MediaPolypropylene, polyester, glass fibre; PES, PTFE, PVDF and nylon membranes

Source: Clarypleat HE, NE, PES, PTFE, PVDF, Nylon and 5000 catalogues and the Kryticalpleat PES catalogue, 2026, as published on each line page.

RO Protect HF152 mm (6") OD; 20", 40", 60"; inside-to-outside flow; end fitting codes 13, 35, 36
ClaryFlow Big Buddy30" media length; dual O-ring; end fitting code 11 (SPL, Code-7)
SealsSilicone, EPDM, Viton, Teflon encapsulated Viton (HF); silicone, Buna-N, FKM, EPDM (Big Buddy)
MediaPleated PP, depth pleated PP, glass micro-fibre, polyester; pleated or meltblown PP (Big Buddy)

Source: RO Protect High Flow catalogue, 2026; ClaryFlow Big Buddy Pleated and Meltblown catalogues, Jun 2026, as published on each line page.

Outer diameter50, 54, 60, 63.5, 65, 75 mm (± 1 mm)
Lengths10" to 60"; catalyst trapping tubes up to 1600 mm
End capsDOE; 226 (Code-7) and 222, fin or flat; BSP, NPT and metric threads; 21 coded, others on request
SealsSilicone, FKM, Buna-N, EPDM, PTFE
MaterialsSS 316L; Hastelloy C-22 or C-276

Source: Clarysynt PM catalogue, 2026; hydrogen peroxide catalogue, 2026, as published on each line page.

SizesSize 1 (7" × 16"), Size 2 (7" × 32"), Size 3 (4" × 8"), Size 4 (4" × 14"); custom sizes
FitmentFlat collar, universal PP collar, SS ring or zinc plated steel ring
MediaPolypropylene or polyester felt, 1 to 200 µm; nylon monofilament mesh, 50 to 300 microns

Source: Bag filter catalogue, 2026, as published on each line page.

SizesG-80 to G-620, 800 to 12,000 cm²
Connections1/4" and 1/2" NPT, 1/4" and 1/2" BSP, stepped hose barb, tri-clamp from 1/4" to 1.5"
MembranesPES and PTFE

Source: Clarypleat capsule filters catalogue (PES and PTFE), Aug 2026, as published on each line page.

Condensate polishing and lenticular modules

Condensate polishing70 mm (pleated) and 54 mm (wound) OD, 60" and 70", DOE
Lenticular modules12" and 16" cellulose depth modules; silicone, NBR or FKM gaskets

Source: CPU series catalogue, 2026; lenticular depth filter catalogue, 2026, as published on each line page.

What to send

Send these, and we confirm the fit

  1. 01

    Make and part number

    From the filter cartridge, its box or the housing nameplate.

  2. 02

    A photograph

    Of the nameplate and of the end cap, seal and handle.

  3. 03

    Micron rating

    And whether it is nominal or absolute, if you know.

  4. 04

    Fluid and flow

    What is filtered, and the flow rate per housing.

  5. 05

    Temperature and pressure

    Operating temperature and pressure, and the change-out pressure you use.

  6. 06

    Quantity

    Elements per housing and your annual use, for scheduled deliveries.

Send your part number

Choose the family. The request form opens with it named; add the make, part number and the details above.

Send your part number

Request a catalogue

Tell us who you are and where to send it. Our team emails the catalogue to you.

By sending this you agree to our Privacy notice.