Housings and systems
ClarySEA FRP housingis a fibre reinforced plastic housing for seawater and corrosive fluids, built to ASME Section X. 100 m³/hr through 18 cartridges.
A fibre reinforced plastic (FRP) cartridge housing for municipal and desalination plants, seawater and corrosive fluids, chemicals, wastewater and food. Shell, heads, nozzles, tube sheet and retainer plate are FRP, with duplex 2205 fasteners, and each housing is hydrostatically tested.

100 m³/hr
ClarySEA FRP housing 18 × 40" cartridges, 61 mm
- Flow
- 100 m³/hr
- Cartridges
- 18 × 40"
- Design pressure
- 6 bar at 21 °C
- Design temperature
- 60 °C
Non‑corroding vessel
FRP shell, heads, nozzles, tube sheet and retainer plate, with duplex 2205 fasteners.
Coded vessel
Designed and manufactured to ASME Section X.
Hydrostatically tested
Each housing is hydro-tested at 9 bar.
Ports provided
Vent port and dirty and clean water drain ports; pressure gauge on request.
How it is built
FRP vessel with duplex fasteners
- FRP vessel
Shell, heads, nozzles, tube sheet and retainer plate in FRP.
- Eighteen cartridges
61 mm, 40" (1016 mm) SOE cartridges with 222 fin ends.
- 5" flange
ASA 150# flanged inlet and outlet, EPDM seals.

| Vessel | FRP |
|---|---|
| Fasteners | Duplex 2205 |
| Seal | EPDM; others on request |
Specifications
Specification table
MaterialsVessel, fasteners, seal
| Property | Value |
|---|---|
| Shell, head, nozzle | FRP |
| Tube sheet, retainer plate | FRP |
| Fasteners | 2205 duplex stainless steel |
| Seal | EPDM; others on request |
Operating limitsDesign values
| Property | Value |
|---|---|
| Flow | 100 m³/hr |
| Design pressure | 0.6 MPa (6 bar; 87 psid) at 21 °C |
| Hydro-test pressure | 0.9 MPa (9 bar; 130.5 psid) at 21 °C |
| Design temperature | 60 °C (140 °F) |
| Design code | ASME Section X |
ConfigurationCartridges and connection
| Property | Value |
|---|---|
| Model | CLARYSEA-18SC4 |
| Housing size | 40" × 18 |
| Cartridges | 18 per vessel, 61 mm OD, 1016 mm (40"), SOE (222 / fin) |
| Connection | ASA 150# flange, 5" |
| Ports | Vent port; dirty and clean water drain ports; pressure gauge on request |
Source: ClarySEA FRP housing catalogue, 2026, p2 to p4.
Where it runs
Seawater, desalination and corrosive water
Municipal and desalination plants, seawater and corrosive fluid filtration, chemical processing, wastewater, and food and consumer products.
61 mm, 40" SOE cartridges with 222 fin ends. Send us your duty and we confirm the cartridge.

“ClarySEA housings are designed and manufactured in accordance with ASME Section X standards.”
Resources for this line
Datasheets and catalogue pages that cover ClarySEA FRP housing, as PDF.
- ClarySEA FRP housing0.3 MB · Apr 2026Download
Related products and tools
Chemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checker
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The ClarySEA FRP housing catalogue and the rest of the housings and systems range, as PDF.
Go to downloads - Compare the housings and systems range
Clary-T CF, Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T BF, Clary-T LF, Polyfilt CF, Polyfilt BF, Polyfilt HF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems
Open the family