Skip to content

String wound

Clarywound GFis wound glass fibre on a metal core. Up to 350 °C.

A string wound depth cartridge in baked or unbaked glass fibre on a metal core. Precision winding forms diamond-shaped flow paths that narrow from the outer diameter to the core, so larger particles stop in the outer layers and finer ones toward the core.

Clarywound GF 10 inch wound glass fibre cartridges, one upright and one lying down

0.5 to 150 µm

Clarywound GF OD 63.5 mm, ID 27.5 mm, 9.75" to 70"

Clarywound GFRequest a quote
Maximum operating temperature
350 °C
Retention rating
0.5 to 150 µm
Recommended change‑out ΔP
2 bar, SS core
Surface area
0.55 ft² per 10"
  • Up to 350 °C

    Glass fibre media on a metal core, for hot lines beyond the range of polymer media.

  • Chemical duty

    The catalogue lists highly corrosive liquids, organic solvents, acids, reactive chemicals and oils.

  • Baked or unbaked

    Two glass fibre media, wound with diamond-shaped flow paths for depth loading.

  • Core material

    SS 202, 304, 304L, 316, 316L or tinned steel, other cores on request.

How it is built

Construction

  1. Continuous winding

    Glass fibre yarn is wound onto a metal core in a continuous process.

  2. Gradient density

    Flow paths get smaller from the outer diameter to the core. Larger particles stop in the outer layers, finer ones toward the core.

  3. No additives

    Gopani certifies that no resin binders, lubricants, antistatic or release agents are used in manufacture.

Clarywound GF 10 inch wound glass fibre cartridges, one upright and one lying down
MediaBaked or unbaked glass fibre
CoreSS 202, 304, 304L, 316, 316L, tinned steel
End capsOn request

Specifications

Specification table

MaterialsMedia, core, end caps

PropertyValue
Filter mediaBaked glass fibre, unbaked glass fibre
CoreSS 202, SS 304, SS 304L, SS 316, SS 316L, tinned steel. Other on request
End capsOn request

PerformanceRetention, temperature, pressure

PropertyValue
Retention rating0.5, 1, 5, 10, 15, 20, 25, 50, 100, 150 µm
Maximum operating temperature350 °C
Recommended change-out ΔP2 bar with stainless steel core. Higher on request
Surface area0.55 ft² per 10" length, standard

DimensionsDiameter and lengths

PropertyValue
OD / ID63.5 ± 0.5 mm / 27.5 ± 0.5 mm
Lengths9.75", 10", 20", 30", 40", 50", 70"
Other OD and lengthsOn request

Ordering codeBuild the part number field by field

PropertyValue
PatternCWGF- followed by micron, length, diameter, end fitting, material and core codes
MicronC = 0.5 µm; D = 1 µm; G = 5 µm; H = 10 µm; I = 20 µm; J = 25 µm; L = 50 µm; M = 100 µm; N = 150 µm
Length09 = 9.75"; 10, 20, 30, 40, 50, 70 (inches)
DiameterS = standard
End fitting0 = none (DOE without end cap)
MaterialGF = glass fibre
CoreS4 = SS 304; 4L = SS 304L; S6 = SS 316; 6L = SS 316L; TS = tinned steel; S4E, 4LE, S6E, 6LE = SS 304, 304L, 316, 316L extended core

Source: Clarywound GF catalogue, 2026, pages 2 to 4. The specification agrees with the Clarywound GF and sintered one-pager, 2026.

Where it runs

Where it is used

Duties in the catalogue

Highly corrosive liquids, organic solvents, acids, reactive chemicals and oils.

Up to 140 °C

Where the temperature allows, Clarywound Extreme in cotton, polyester, nylon or rayon on a stainless steel core covers 120 to 140 °C.

“Larger particles are captured in outer layers. Finer particles are retained toward the core.”
Clarywound GF catalogue, 2026, page 2
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Clarywound GF, as PDF.

  • Genset oil filtration2.2 MB · Oct 2026
    Download
  • Paint and coating2.7 MB · Jun 2026
    Download
  • Clarywound GF0.2 MB · Apr 2026
    Download
  • Clarywound GF and sintered one-pager0.2 MB · Jan 2026
    Download

Open the full library

Related products and tools

  • Above 350 °C

    Fluidizing filters is rated to 600 °C.

    View Fluidizing filters
  • Finer ratings

    Clarypleat PVDF is available from 0.45 µm (0.1, 0.22, 0.45 µm).

    View Clarypleat PVDF
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker
  • Housings

    Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.

    View housings and systems

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clarywound GF catalogue and the rest of the string wound range, as PDF.

    Go to downloads
  • Compare the string wound range

    Clarywound 3X, Clarywound Extreme, Clarywound Ultra, Clarywound Extreme Bico, Clarywound CPU

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.