Skip to content

Syringe and Lab Filters

Uni.Q 50 PES Disc filter, 50 mmis a 50 mm PES membrane disc filter for aqueous solutions, buffers and media in small batches. 0.2 and 0.45 µm.

A polyethersulfone membrane sealed in virgin gamma stable polypropylene with no added components, for sterile filtration and clarification of aqueous solutions, buffers and media in small batches. It is used in single-use assemblies and in pharma processes. The stepped hose barb takes ¼ to ½ in tubing; the filter is integrity testable by bubble point, with 100% lot traceability. It is sterilizing grade, autoclavable and gamma, with USP Class VI plastics and REACH, RoHS and ICH Q3D statements. Two grades, SP and HP, have different housings and different maximum operating pressures.

Principle diagram: liquid enters through the stepped hose barb, passes the PES membrane held in the polypropylene housing, and leaves through the outlet barb

0.2 and 0.45 µm

Uni.Q 50 PES 50 mm, ~20 cm² effective area

Uni.Q 50 PESRequest a quote
Pore sizes
0.2 and 0.45 µm
Effective filtration area
~20 cm²
Maximum operating pressure
SP 3.0 bar, HP 6.0 bar
Sterilisation
Autoclavable and gamma
  • Fits the tubing you use

    The stepped hose barb adapts to tubing from ¼ to ½ in (6.25 to 12.5 mm).

  • For cGMP work

    Can be used in conformance with cGMP practices.

  • Integrity testable

    By bubble point. Integrity test data is part of the standard test certificate.

  • Traceable

    100% lot traceability.

How it is built

Construction

  1. PES membrane

    Polyethersulfone sets the pore size, 0.2 or 0.45 µm, across about 20 cm² of effective area.

  2. Polypropylene housing

    Virgin gamma stable polypropylene with no added components. The SP and HP grades have different housings.

  3. Stepped hose barb

    One barb takes tubing from ¼ to ½ in, so the filter fits the transfer line or assembly as it is.

MembranePES
HousingPolypropylene
ConnectionStepped hose barb

Specifications

Specification table

ConstructionMembrane and housing

PropertyValue
MediaPolyethersulfone (PES) membrane
HousingVirgin gamma stable polypropylene with no added components

FiltrationPore size, grade, area, sterilisation

PropertyValue
Pore size0.2 µm and 0.45 µm
GradeSterilizing grade
Filtration area~20 cm² effective
SterilisationAutoclavable and gamma

Connection and pressureHose barb, two housings, two pressure grades

PropertyValue
End connection¼ to ½ in (6.25 to 12.5 mm) stepped hose barb
HousingsTwo grades with different housings: the SP and HP grades differ in pressure capacity
Maximum operating pressure, SP (standard pressure) grade3.0 bar
Maximum operating pressure, HP (high pressure) grade6.0 bar

Data on requestAsk for the figures for your grade

PropertyValue
Bubble pointIntegrity test data available
Flow rateFlow rate data available
Burst pressureBurst pressure rating available

Compliance and documentsAs listed on the data sheet

PropertyValue
PlasticsUSP Class VI plastics
StatementsREACH and RoHS statement; ICH Q3D; residual solvent statement
Standard test certificateIntegrity test data, pressure rating, flow rate data and burst pressure rating
QualityQuality compliance certificates

Source: Gopani Uni.Q 50 PES disc filter data sheet, 19 Nov 2026, one page: 01 Specification table, 02 Features, 03 Compliance and documents.

Where it runs

Small-batch aqueous filtration and single-use assemblies

Where the data sheet puts it

Sterile filtration and clarification of aqueous solutions, buffers and media in small batches.

Where Gopani places it

Single-use assemblies and pharma applications: an inline filter on a transfer or fill line, where a 50 mm disc on a hose barb suits the batch better than a capsule.

Larger batches

Clarypleat PES capsules, from 800 cm², and Clarypleat PES filter cartridges take the same aqueous duty at pilot and production scale.

“For sterile filtration and clarification of aqueous solutions, buffers and media in small batches.”
Uni.Q 50 PES disc filter data sheet, 2026
Request the catalogues

Resources for this line

Ask an application engineer for the datasheet.

Contact an application engineer

Related products and tools

Request a quote

Send the solution, the batch volume, the pore size and pressure grade you need, the tubing size and the quantity. An application engineer replies with the matching Uni.Q 50 filter and the data for your grade.

Request a quote
  • Request the catalogues

    Catalogues for the syringe and lab filters range, sent by email on request.

    Go to the catalogues
  • Compare the syringe and lab filters range

    Uni.Q syringe filters, Uni.Q 50 PTFE, HPLC solvent inlet filters

    Open the family

Request a catalogue

Tell us who you are and where to send it. Our team emails the catalogue to you.

By sending this you agree to our Privacy notice.