String wound
Clarywound Ultrais a polypropylene string wound cartridge made on automated lines. 5 and 10 µm.
A focused range of polypropylene string wound cartridges for downstream equipment protection. Polypropylene yarn on a polypropylene core, wound with density rising from the outer to the inner layers, on optimised and automated production that keeps the cost down.

5 and 10 µm
Clarywound Ultra OD 61 mm, ID 27.5 mm, 10" to 40"
- Retention rating
- 5, 10 µm
- Maximum operating temperature
- 70 °C
- Recommended change‑out ΔP
- 1.2 bar at 21 °C
- Lengths
- 10" to 40"
Automated production
Optimised, automated winding keeps the cartridge cost down for routine duty.
All polypropylene
Polypropylene yarn and core. No resin binders, lubricants, antistatic or release agents are used.
Depth filtration
Density rises gradually from the outer to the inner layers, so dirt loads through the wall.
Double open ended
Supplied DOE without end caps or seals, for housings that seal on the cartridge ends.
How it is built
Construction
- Automated winding
Polypropylene yarn is wound onto a polypropylene core on automated production.
- Gradual density
Density increases from the outer layers to the inner, for depth filtration.
- Double open ended
Supplied DOE without end caps or seals.

| Media | Polypropylene |
|---|---|
| Core | Polypropylene |
| Ends | DOE, no end cap |
Specifications
Specification table
MaterialsMedia and core
| Property | Value |
|---|---|
| Filter media | Polypropylene |
| Core | Polypropylene |
PerformanceRetention, temperature, pressure
| Property | Value |
|---|---|
| Retention rating | 5, 10 µm |
| Maximum operating temperature | 70 °C (158 °F), polypropylene with polypropylene |
| Recommended change-out ΔP | 0.12 MPa (1.2 bar; 17.4 psid) at 21 °C |
| Surface area | ≥ 0.52 ft² per 10" cartridge length (OD 61 mm) |
DimensionsDiameter and lengths
| Property | Value |
|---|---|
| OD / ID | 61 ± 0.5 mm / 27.5 ± 0.5 mm |
| Lengths | 10", 20", 30", 40" |
| Other OD and lengths | On request |
| End fittings and seals | DOE without end cap, no seal |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | CWU- followed by micron, length, diameter, end fitting, material, core and seal codes |
| Micron | G = 5 µm; H = 10 µm |
| Length | 10, 20, 30, 40 (inches) |
| Diameter | S = 61 mm |
| End fitting | 0 = none (DOE without end cap) |
| Material | PP = polypropylene |
| Core | PP = polypropylene |
| Seal | X = none |
Source: Clarywound Ultra catalogue, 2026, pages 2 to 4.
Where it runs
Where it is used
Raw water treatment, wastewater treatment, electroplating, power generation, and chemical and pharmaceutical processing.
For ratings outside 5 and 10 µm, other media or end caps, Clarywound Extreme covers 0.5 to 150 µm with eleven end fittings.

“Gradual density increase from outer to inner layers.”
Resources for this line
Datasheets and catalogue pages that cover Clarywound Ultra, as PDF.
- Clarywound Ultra0.3 MB · Apr 2026Download
Related products and tools
Above 70 °C
Clarywound GF is rated to 350 °C.
View Clarywound GFFiner ratings
Clarywound 3X is available from 1 µm (1 and 5 µm).
View Clarywound 3XChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checkerHousings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Clarywound Ultra catalogue and the rest of the string wound range, as PDF.
Go to downloads - Compare the string wound range
Clarywound 3X, Clarywound Extreme, Clarywound Extreme Bico, Clarywound CPU, Clarywound GF
Open the family