Skip to content

Housings and systems

Clary-T BFis a range of stainless steel bag filter housings, single bag or multi-bag. Up to 600 m³/hr.

Single bag housings for Size 1 to Size 4 bags, with top or side entry, and multi-bag housings that hold 2 to 39 Size 2 bags. Flow runs from the inside of the bag outward, so the solids stay in the bag, and an internal cage supports the bag as the differential pressure builds. The standard rating is 0.7 MPa (7 bar) and 65 °C. Higher pressure and temperature ratings on request.

Clary-T BF, catalogue image

Up to 600 m³/hr

Clary-T BF Size 1 to Size 4 bags

Clary-T BFRequest a quote
Flow
Up to 600 m³/hr
Standard operating pressure
0.7 MPa (7 bar)
Standard operating temperature
65 °C
Bags per multi‑bag vessel
2 to 39
  • Solids stay in the bag

    Flow runs inside to outside, so the contaminant is removed with the bag.

  • Supported bags

    An internal cage supports the bag so it does not burst as the differential pressure builds.

  • Bag collar to suit

    PP collar, rubber collar, SS ring, PP ring or snap band.

  • Closures for the duty

    Rathmann clamps with a davit arm, bolted or V-band closures, and quick opening closures with auto venting.

How it is built

Inside‑to‑outside flow on a supporting cage

  1. Liquid enters the bag

    Flow runs from the inside of the bag outward; solids stay in the bag.

  2. Cage supports the bag

    An internal cage stops the bag bursting as the differential pressure rises.

  3. Single or multi

    BF-I single round for one 4" or 7" bag; BF-II multi round for 2 to 39 Size 2 bags.

Clary-T BF, catalogue image
EntryTop or side; can be duplexed
Bag fixingPP or rubber collar, SS or PP ring, snap band
Vent and drain1/2", 3/4", 1"

Specifications

Specification table

MaterialsHousing, clamp, seals

PropertyValue
HousingSS 304, SS 316, SS 316L, duplex SS 2205, duplex SS 2507
Closure clampSS 304
O-ringSilicone, Viton, EPDM, PTFE; others on request

Operating limitsFlow, pressure, temperature, bags

PropertyValue
FlowUp to 600 m³/hr
Standard operating pressure0.7 MPa (7.0 bar, 101.5 psi)
Standard operating temperature65 °C (149 °F)
Higher ratingsHigher pressure and temperature ratings on request.
Bags per multi-bag vessel2 to 39 (standard vessels hold Size 2 bags)
Bag sizesSize 1, 7" × 16"; Size 2, 7" × 32"; Size 3, 4" × 8"; Size 4, 4" × 14"
Inlet and outletASA 150# flange, NPT, BSP, DIN flange, BS-10 Table 'D', 'E', 'F' flange, tri-clover; 1/2" to 6" and larger
Design codeASME Section VIII Division 1, GEP, PED 97/23/EC, CE marking
Internal finishMatt, mirror, glass bead blasted

Standard designsDimensions A, B, C, D in mm, standard connection

PropertyValue
Single bag, dished end, 7" × 16"A 1230, B 1115, C 325, D 1030; 1.5", 2", 2.5" or 3"
Single bag, dished end, 7" × 32"A 1500, B 1380, C 325, D 1296; 1.5", 2", 2.5" or 3"
Single bag, flat head, 7" × 16"A 913, B 766, C 147; 1.5", 2", 2.5" or 3"
Single bag, flat head, 7" × 32"A 1195, B 1050, C 147; 1.5", 2", 2.5" or 3"
Multi-bag, quick opening, inline, davit arm2 to 12 bags; 4" to 10" connections
Multi-bag, offline, lifting lug2 to 11 bags; 4" to 8" connections

Ordering codeBuild the part number field by field

PropertyValue
PatternCTBF- + housing type + bag size + design code + no. of bags + connection type + material + size + O-ring
Housing type1B = single bag; MB = multi bag
Bag sizeS1 = 7" × 16"; S2 = 7" × 32"; S3 = 4" × 8"; S4 = 4" × 14"
Design codeA = ASME Section VIII Division 1; C = CE mark; G = GEP; P = PED
No. of bags2 digits
Connection typeA = ASA 150# flange; D, E, F = BS-10 Table 'D', 'E', 'F' flange; U = DIN flange
Material04 = SS 304; 4L = SS 304L; 16 = SS 316; 6L = SS 316L; DL = Duplex 2205
Connection size34 = 3/4"; 01 = 1"; 15 = 1 1/2"; 02 = 2"; 25 = 2 1/2"; 03 to 06 = 3" to 6"; 08 = 8"; 10 = 10"; 12 = 12"
O-ringB = Buna-N; E = EPDM; S = silicone; V = Viton; T = Teflon encapsulated Viton

Source: Clary-T SS All Filter Housing catalogue, 2026, p14 to p16, and the Gopani bag filter systems catalogue, p6 to p12 (flow, closures and dimensions). Dimensions in mm.

Where it runs

Bulk solids out of water and process liquids

Bags to fit

Claryfil felt bags in polypropylene or polyester, and nylon monofilament mesh bags, in Size 1 to Size 4.

Ahead of cartridges

A bag stage takes the bulk solids before the cartridge stage downstream.

“The internal support ensures bags will not burst as high differential pressure builds up during operation.”
Gopani bag filter systems catalogue
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Clary-T BF, as PDF.

  • Clary-T SS filter housings2.1 MB · Sep 2026
    Download
  • Bag filter systems1.3 MB · Apr 2026
    Download

Open the full library

Related products and tools

  • Above 65 °C

    Clary-T Vent is rated to 135 °C.

    View Clary-T Vent
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clary-T BF catalogue and the rest of the housings and systems range, as PDF.

    Go to downloads
  • Compare the housings and systems range

    Clary-T CF, Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T LF, ClarySEA FRP housing, Polyfilt CF, Polyfilt BF, Polyfilt HF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.