Skip to content

Capsules

Clarypleat PES capsuleis a PES membrane capsule for laboratory, pilot and small-scale filtration. Every capsule is integrity tested.

A polyethersulfone membrane in polypropylene hardware for liquids and gases at laboratory, pilot and small scale. Every capsule is integrity tested. Five sizes run from 800 cm² to 12,000 cm², with NPT, hose barb and tri-clamp connections.

Clarypleat PES capsule, catalogue image

0.1, 0.2, 0.45, 0.8 µm

Clarypleat PES capsule 800 to 12,000 cm², five sizes

Clarypleat PES capsuleRequest a quote
Bacterial retention
LRV > 7, B. diminuta
Bubble point
≥ 3.3 bar (48 psi)
Filtration area
800 to 12,000 cm²
Integrity tested
100% of capsules
  • Every capsule tested

    All Clarypleat PES capsules are 100% integrity tested, with a bubble point of ≥ 3.3 bar.

  • Same membrane as the cartridge

    The Clarypleat PES catalogue states that capsules, cartridges and lab-scale formats use the same PES membrane and polymer materials.

  • Five sizes

    From G-80 at 800 cm² to G-620 at 12,000 cm² of membrane.

  • Self‑contained unit

    Membrane, support and hardware are sealed in one polypropylene unit, made in a class 1000 facility.

How it is built

Construction

  1. PES membrane

    Hydrophilic polyethersulfone sets the rating, from 0.1 to 0.8 µm.

  2. Polypropylene support and hardware

    PP support and drainage layers and PP hardware form the capsule.

  3. Class 1000 manufacture

    Made in a class 1000 facility; every capsule is integrity tested.

Clarypleat PES capsule, catalogue image
MembranePES
HardwarePolypropylene
O-ringSilicone, others on request

Specifications

Specification table

MaterialsMembrane, support, hardware

PropertyValue
Filter membranePolyethersulfone (PES)
Support and drainagePolypropylene
HardwarePolypropylene
O-ringSilicone, others on request
ComponentsAll components as per Code of Federal Regulations (CFR), Title 21

PerformanceRetention, temperature, pressure

PropertyValue
Retention rating0.1, 0.2, 0.45, 0.8 µm
Bacterial retentionLRV > 7, B. diminuta ATCC 19146
Bubble point≥ 3.3 bar (48 psi)
Maximum operating temperature80 °C (176 °F)
Maximum differential pressure60 psi (4 kg/cm²) at 21 °C
pH compatibility1 to 10
SterilizationAutoclave at 121 °C, 30 minutes, up to 5 cycles. Not suitable for in-line steam sterilization

SizesArea, connections, length × diameter

PropertyValue
G-80, 800 cm² (0.86 ft²)1/4" NPT male or 1/4" to 1/2" stepped hose barb; 4" × 2.5"
G-150, 1300 cm² (1.39 ft²)1/4" or 1/2" NPT male, 1/2" hose barb, 1 1/4" tri-clamp; 6" × 2.5"
G-300, 2500 cm² (2.69 ft²)1/4" or 1/2" NPT male, 1/2" hose barb, 1 1/4" tri-clamp; 8" × 2.5"
G-610, 6000 cm² (6.45 ft²)1 1/4" tri-clamp; 10" × 3.3"
G-620, 12,000 cm² (12.91 ft²)1 1/4" tri-clamp; 20" × 3.3"

Ordering codeBuild the part number field by field

PropertyValue
PatternCFPES-S- followed by micron, material, hardware and seal codes
MicronX = 0.10 µm; A = 0.20 µm; B = 0.45 µm; AS = 0.8 µm
MaterialPES = polyethersulfone
HardwarePP = polypropylene
SealS = silicone

Source: Clarypleat capsule filters catalogue (PES and PTFE), edition 10 Aug 2026, PDF pages 4 and 5.

Where it runs

Laboratory, pilot and small-scale filtration

Where the catalogue puts it

Particle removal, clarification, venting and gas filtration in laboratory, pilot and small-scale processing.

Scaling up

Clarypleat PES cartridges carry the same PES membrane in 5" to 30" lengths.

“All Clarypleat polyethersulfone capsule filters are 100% integrity tested.”
Clarypleat capsule filters catalogue, 2026, p4
See the catalogues

Questions

Clarypleat PES capsule: common questions

Can the PES capsule be steamed in line?
No. It is autoclavable at 121 °C, 30 minutes, up to 5 cycles, and is not suitable for in-line steam sterilization.

Resources for this line

Datasheets and catalogue pages that cover Clarypleat PES capsule, as PDF.

  • Clarypleat capsule filters, PES and PTFE2.9 MB · Sep 2026
    Download

Open the full library

Related products and tools

  • Above 80 °C

    Fluidizing filters is rated to 600 °C.

    View Fluidizing filters
  • Pre-filtration for this membrane

    ClaryNira MB: meltblown pp with microban® product protection, 1 to 100 µm.

    View ClaryNira MB
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker
  • Housings

    Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.

    View housings and systems

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clarypleat PES capsule catalogue and the rest of the capsules range, as PDF.

    Go to downloads
  • Compare the capsules range

    Clarypleat PTFE capsule

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.