Pleated cartridges
Clarypleat PVDFis a pleated cartridge with a hydrophilic PVDF pre-filter and final membrane. 0.1, 0.22 and 0.45 µm.
Hydrophilic polyvinylidene fluoride pre-filter and final membrane, pleated on polypropylene support, cage, core and end caps. The pre-filter holds the coarser load so the final membrane plugs more slowly.

0.1, 0.22, 0.45 µm
Clarypleat PVDF OD 69 mm, 10" to 40"
- Membrane area
- ≥ 0.6 m² per 10"
- Maximum operating temperature
- 80 °C
- Recommended change‑out ΔP
- 2.4 bar
- Bacterial endotoxin
- ≤ 0.25 EU/mL
Pre‑filter and final membrane
A PVDF pre-filter and the PVDF final membrane sit in the same pleat pack.
Thermally welded
All components are sealed by thermal welding.
Steam and autoclave
Up to 30 cycles of 60 min at 124 °C or 20 cycles at 134 °C, by autoclave or steam in place.
Polypropylene hardware
Support, end caps, cage and core in polypropylene.
How it is built
How it is built
- Pre‑filter layer
The upstream PVDF layer retains the coarser particles and reduces fouling of the final membrane.
- Final membrane
The downstream PVDF membrane gives the rated retention.
- Welded cartridge
Pleat pack, core, cage and end caps are joined by thermal welding.

| Pre and final filter media | Polyvinylidene fluoride |
|---|---|
| Support, end caps, cage, core | Polypropylene |
| O-ring / gasket | Silicone, FKM, Buna-N, EPDM |
Specifications
Specification table
MaterialsMedia, hardware, seals
| Property | Value |
|---|---|
| Pre and final filter media | Polyvinylidene fluoride (PVDF), hydrophilic |
| Support, end caps, cage, core | Polypropylene |
| O-ring / gasket | Silicone, FKM, Buna-N, EPDM |
Operating limitsAs stated
| Property | Value |
|---|---|
| Retention rating | 0.1, 0.22, 0.45 µm |
| Maximum operating temperature | 80 °C (176 °F) |
| Recommended change-out ΔP | 2.4 bar |
| Autoclave | 30 cycles of 60 min at 124 °C; 20 cycles of 60 min at 134 °C |
| Steam in place | 30 cycles of 60 min at 124 °C, ΔP ≤ 0.5 bar; 20 cycles of 60 min at 134 °C, ΔP ≤ 0.5 bar |
DimensionsNominal
| Property | Value |
|---|---|
| Lengths | 10", 20", 30", 40" |
| Diameter | 69 ± 1.5 mm |
| Membrane area | ≥ 0.6 m² per 10" cartridge length |
Safety dataAs printed in the catalogue
| Property | Value |
|---|---|
| Bacterial endotoxin | ≤ 0.25 EU/mL |
| Extractables | ≤ 20 mg per 10" |
| Regulatory references | FDA 21 CFR 177.1655; ISO 10993 parts 1 and 5; EN 285:2006+A2:2009; Regulation (EC) No 1935/2004; ASTM D6394 |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | CPPVDF- followed by micron, length, diameter, end fitting, hardware and seal codes |
| Micron | X = 0.1 µm; A = 0.22 µm; B = 0.45 µm |
| Length | 10, 20, 30, 40 (inches) |
| Diameter | S = 69 mm |
| End fitting | 1 = Fin / 226; 2 = Fin / 222; 3 = Flat / 226; 4 = Flat / 222 |
| Hardware | PP = polypropylene |
| Seal | E = EPDM; S = silicone; V = Viton |
Source: Clarypleat PVDF catalogue, 2026, PDF pages 2 to 4. Specification table on page 3. Supplied non-sterile unless otherwise specified.
Where it runs
Where it is used
Cell culture media containing serum or peptone, clarified cell cultures, protein purification and downstream process liquids.
Liquid membrane filtration in food and beverage processing.

“Pre-filter layer reduces clogging. Final membrane ensures fine retention.”
Related products and tools
Above 80 °C
Kryticalpleat All Fluoropolymer is rated to 160 °C.
View Kryticalpleat All FluoropolymerFiner ratings
Clarypleat HE is available from 0.22 µm (0.22 to 50 µm).
View Clarypleat HEChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checkerHousings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Clarypleat PVDF catalogue and the rest of the pleated cartridges range, as PDF.
Go to downloads - Compare the pleated cartridges range
Kryticalpleat PES, Kryticalpleat All Fluoropolymer, Clarypleat PES, Clarypleat PTFE, Clarypleat HE, Clarypleat NE, Clarypleat CPU, Clarypleat Nylon, Clarypleat 5000
Open the family