Meltblown
RO Protect Ultrais an all-polypropylene meltblown depth cartridge for pre-RO and industrial water. 5 and 10 µm.
A melt blown polypropylene depth cartridge for pre-RO filtration in desalination plants, industrial water treatment, process water, reuse water and wastewater. The media is binder-free, with no resins, lubricants or additives, and the all-polypropylene construction is compatible with water, weak acids and bases, chemicals and solvents.

5, 10 µm
RO Protect Ultra OD 61 or 110 mm, 10" to 40"
- Retention rating
- 5, 10 µm
- Maximum operating temperature
- 60 °C
- Recommended change‑out ΔP
- 1.2 bar at 21 °C
- OD, standard or jumbo
- 61 or 110 mm
Polypropylene only
Thermally bonded polypropylene fibres with no resin binders, lubricants, anti-static or release agents.
Two ratings
5 and 10 µm, in 10", 20", 30" and 40" lengths.
Jumbo option
The 110 mm jumbo carries ≥ 0.94 ft² per 10" length against ≥ 0.52 ft² for the standard.
Scheduled delivery
Cartridges are held in stock, and deliveries can be scheduled to cover an annual requirement.
How it is built
Melt blown polypropylene depth structure
- Depth fibre matrix
Particles are captured through the depth of the melt blown polypropylene fibre matrix.
- Thermally bonded fibres
The fibres are thermally bonded, with no resin binders, lubricants, anti-static or release agents.
- Ahead of the membranes
The cartridge removes particles before RO membranes and process systems.

| Media | Polypropylene |
|---|---|
| Core | No core |
| Ends | DOE, no end cap |
Specifications
Specification table
MaterialsMedia and construction
| Property | Value |
|---|---|
| Filter media | Polypropylene |
| Construction | All polypropylene; no resins, lubricants or additives |
PerformanceRetention, temperature, pressure
| Property | Value |
|---|---|
| Retention rating | 5, 10 µm |
| Maximum operating temperature | 60 °C (140 °F) |
| Recommended change-out ΔP | 0.12 MPa (1.2 bar; 17.4 psid) at 21 °C |
| Surface area | ≥ 0.52 ft² standard, ≥ 0.94 ft² jumbo, per 10" cartridge length |
DimensionsDiameters and lengths, nominal
| Property | Value |
|---|---|
| OD / ID, standard | 61 ± 1 mm / 28 ± 0.5 mm |
| OD / ID, jumbo | 110 ± 2 mm / 28 ± 0.5 mm |
| Lengths | 10", 20", 30", 40" |
| End fitting | DOE without end cap |
| Box pack | 50 per box for 10" standard; 25 per box for 20", 30", 40" standard; 20 per box for 10" jumbo; 10 per box for 20" jumbo |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | RPUL- followed by micron, length, diameter, core, end fitting, material and seal |
| Micron | G = 5 µm, H = 10 µm |
| Length | 10, 20, 30, 40 (inches) |
| Diameter | S = 61 mm, J = 110 mm |
| Core | X = no core |
| End fitting | 0 = none (DOE without end cap) |
| Material / seal | PP = polypropylene |
Source: RO Protect Ultra catalogue, Sep 2026, PDF pages 2 to 4. Specification table on page 3. Change-out pressure is a recommendation; confirm against your fluid and temperature.
Where it runs
Pre-RO, industrial, process, reuse and wastewater
Pre-RO filtration for desalination plants, industrial water treatment systems, process water, reuse water and wastewater treatment.
As the two catalogues print them: Ultra comes in 5 and 10 µm, Eco in 1, 5, 10, 20 and 25 µm. Ultra is rated to 60 °C with change-out at 1.2 bar; Eco to 80 °C with change-out at 1.4 bar. Ultra has a 28 mm ID, Eco 27.5 mm. Both are binder-free meltblown polypropylene, OD 61 or 110 mm, 10" to 40", with the same surface area per 10" length.

“Gopani filters are made from thermally bonded polypropylene fibers and contain no resin binders, lubricants, anti-static, or release agents.”
Questions
RO Protect Ultra: common questions
- How does it differ from RO Protect Eco?
- On the two catalogues: Ultra is offered in 5 and 10 µm against 1 to 25 µm for Eco, is rated to 60 °C against 80 °C, has a recommended change-out of 1.2 bar against 1.4 bar, and has a 28 mm ID against 27.5 mm. Diameters, lengths and surface area per 10" are the same.
- Is there a version with end caps or a core?
- The catalogue lists one end fitting, DOE without end cap, and no core.
Resources for this line
Datasheets and catalogue pages that cover RO Protect Ultra, as PDF.
- RO Protect Ultra1.5 MB · Sep 2026Download
Related products and tools
Above 60 °C
RO Protect Extreme is rated to 80 °C.
View RO Protect ExtremeFiner ratings
RO Protect Eco Plus is available from 1 µm (1 to 10 µm).
View RO Protect Eco PlusChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checkerHousings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The RO Protect Ultra catalogue and the rest of the meltblown range, as PDF.
Go to downloads - Compare the meltblown range
RO Protect Extreme, RO Protect Prime, RO Protect Eco Plus, RO Protect Eco, ClaryNira MB
Open the family