High flow
ClaryFlow Big Buddytakes up to 150 gpm (36 m³/hr) through one 30" pleated element. Meltblown depth media, up to 100 gpm.
A 30" cartridge with a dual O-ring seal, in two constructions: pleated polypropylene for sediment and hard solids, or 100% polypropylene meltblown depth media for sediments and gelatinous substances. For residential, commercial and industrial process water.
1 to 50 µm
ClaryFlow Big Buddy 30" media length
- Max flow rate, pleated
- 150 gpm (36 m³/hr)
- Max flow rate, meltblown
- 100 gpm (27 m³/hr)
- Max working pressure
- 125 psi (8.75 bar)
- Max temperature
- 52 °C (125 °F)
Two media, one format
Pleated polypropylene for sediment and hard solids, or 100% polypropylene meltblown depth media for sediments and gelatinous substances. Both are 30" with a dual O-ring.
Flow per element
Up to 150 gpm (36 m³/hr) through a pleated element and up to 100 gpm (27 m³/hr) through a meltblown element.
Down to 1 µm absolute
Both catalogues list a 1 µm absolute rating, with ratings up to 50 µm in each ordering matrix.
Four seal materials
The dual O-ring comes in silicone, Buna-N, FKM or EPDM.
How it is built
Pleated surface or meltblown depth, in one 30" format.
- Pleated: more surface area
The pleated cartridge offers more surface area for greater throughput, and the extended area gives it a high dirt holding capacity. It removes sediment and hard solids.
- Meltblown: depth media
The 100% polypropylene depth cartridge captures contaminants throughout the media structure and filters sediments and gelatinous substances.
- Dual O‑ring seal
Both constructions seal with a dual O-ring and are installed, serviced and replaced in the same way.
| Media | Pleated PP or meltblown PP depth media |
|---|---|
| Centre tube | Polypropylene |
| Seal | Dual O-ring: silicone, Buna-N, FKM, EPDM |
Specifications
Specification table
ConstructionsOne cartridge, two media
| Property | Value |
|---|---|
| Pleated | Pleated polypropylene media, high surface area (Pleated catalogue, p2) |
| Meltblown | 100% polypropylene depth media (Meltblown catalogue, p2) |
MaterialsAs listed in each catalogue, p3
| Property | Value |
|---|---|
| Filter media | Pleated: PP (pleated). Meltblown: PP |
| Endcaps, core | Pleated: PP, FG. Meltblown: PP & PFG |
| Centre tubes | Polypropylene |
| O-ring (dual) | Silicone, Buna-N, FKM, EPDM |
PerformanceMaximum operating conditions, p3
| Property | Value |
|---|---|
| Micron ratings | 1, 5, 10, 25 and 50 µm in both ordering matrices; down to 1 µm absolute |
| Max flow rate, pleated | 150 gpm (36 m³/hr) |
| Max flow rate, meltblown | 100 gpm (27 m³/hr) |
| Max temperature | 125 °F (52 °C) |
| Max working pressure | 125 psi (8.75 bar) |
| Max change pressure, pleated | 30 psi (2 bar) |
| Max change pressure, meltblown | 40 psi (2.7 bar) |
| Pressure drop | The Pleated catalogue, p3, charts pressure drop against flow for 1 µm absolute and 1, 5, 20, 50 and 150 µm. Ask an application engineer for the figures at your flow. |
DimensionsLength and seal
| Property | Value |
|---|---|
| Length (media) | 30" |
| Seal | Dual O-ring |
Ordering codeAs printed in each catalogue: Pleated p4, Meltblown p3
| Property | Value |
|---|---|
| Pattern | CFBB- followed by type, micron, length, end fitting, media, core, seal |
| Type | P = Pleated (Pleated catalogue); P = Meltblown (Meltblown catalogue) |
| Micron | D = 1 µm, G = 5 µm. Both catalogues print H for 10, 25 and 50 µm alike; an application engineer confirms the code |
| Length | 30 = 30" |
| End fitting | 11 - SPL, Code - 7 |
| Media | PP = Polypropylene |
| Core | PP = Polypropylene; X = None |
| Seal | S = Silicone; B = Buna-N; V = FKM; E = EPDM |
Source: ClaryFlow Big Buddy Pleated catalogue, Jun 2026, PDF p2 to p4, and ClaryFlow Big Buddy Meltblown catalogue, Jun 2026, PDF p2 and p3. The catalogues mark the core and the maximum flow rate with an asterisk and give no note for it.
Where it runs
Residential, commercial and industrial process water.
Both catalogues name residential water filtration, commercial facilities and industrial process water. Pleated: sediment and hard solids. Meltblown: sediments and gelatinous substances. Check chemical compatibility with an application engineer for anything other than water.
Both constructions are readily available, and scheduled delivery can be set up against an annual requirement.
Related products and tools
Housings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Request the catalogues
The ClaryFlow Big Buddy catalogue and the rest of the high flow range, sent by email on request.
Go to the catalogues - Compare the high flow range
RO Protect HF
Open the family