Skip to content

Meltblown

RO Protect Ecois density graded meltblown polypropylene with no binders or additives. Five ratings, 1 to 25 µm.

A density graded meltblown polypropylene depth cartridge for water, wastewater, RO pre-filtration and process fluids. It contains no binders, resins, lubricants or additives, so it transfers no taste, odour or colour to the filtered fluid.

RO Protect Eco, catalogue image

1 to 25 µm

RO Protect Eco OD 61 or 110 mm, 10" to 40"

RO Protect EcoRequest a quote
Retention rating
1, 5, 10, 20, 25 µm
Maximum operating temperature
80 °C
Recommended change‑out ΔP
1.4 bar at 21 °C
OD, standard or jumbo
61 or 110 mm
  • Polypropylene only

    No binders, resins, lubricants or additives, so no taste, odour or colour transfer.

  • Five ratings

    1, 5, 10, 20 and 25 µm, in 10" to 40" lengths.

  • Jumbo option

    The 110 mm jumbo carries ≥ 0.94 ft² per 10" length against ≥ 0.52 ft² for the standard.

  • Disposal

    Spent cartridges can be incinerated, shredded or compacted.

How it is built

Density graded, from a coarse outside to a dense core.

  1. Coarse outer layer

    Takes the bulk of the particle load.

  2. Dense inner layer

    Holds the fine particulate and sets the rating.

  3. Thermally bonded microfibres

    100% thermally bonded polypropylene microfibres, with no resin binders, lubricants, antistatic or release agents.

RO Protect Eco, catalogue image
MediaPolypropylene
End caps and corePolypropylene, optional
EndsDOE, no end cap

Specifications

Specification table

MaterialsMedia, core, end caps

PropertyValue
Filter mediaPolypropylene
End caps and core (optional)High-strength polypropylene

PerformanceRetention, temperature, pressure

PropertyValue
Retention rating1, 5, 10, 20, 25 µm
Maximum operating temperature80 °C (176 °F)
Recommended change-out ΔP0.14 MPa (1.4 bar; 20.3 psid) at 21 °C
Surface area≥ 0.52 ft² standard, ≥ 0.94 ft² jumbo, per 10" cartridge length

DimensionsDiameters and lengths

PropertyValue
OD / ID, standard61 ± 0.5 mm / 27.5 ± 0.5 mm
OD / ID, jumbo110 ± 0.5 mm / 27.5 ± 0.5 mm
Lengths10", 20", 30", 40"
End fittingDOE without end cap
Box pack50 per box for 10" standard; 25 per box for 20", 30", 40" standard; 20 per box for 10" jumbo; 10 per box for 20" jumbo

Ordering codeBuild the part number field by field

PropertyValue
PatternRPEC- followed by micron, length, diameter, core, end fitting, seal
MicronD = 1 µm, G = 5 µm, H = 10 µm, I = 20 µm, J = 25 µm
Length10, 20, 30, 40 (inches)
DiameterS = 61 mm, J = 110 mm
CoreX = no core
End fitting0 = none (DOE without end cap)
SealX = none

Source: RO Protect Eco catalogue, 2026, p2 to p4. Change-out pressure is a recommendation; confirm against your fluid and temperature.

Where it runs

Water, wastewater and process fluids.

Applications

Water and wastewater, reverse osmosis pre-filtration, chemical processing fluids, paints, inks and coatings, food and beverage, and plating and photographic solutions.

Higher dirt holding

RO Protect Eco Plus is rated at twice the dirt holding capacity of RO Protect Eco.

“No binders, resins, lubricants or additives, so no taste, odour or colour transfer.”
RO Protect Eco catalogue, 2026, p2
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover RO Protect Eco, as PDF.

Open the full library

Related products and tools

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The RO Protect Eco catalogue and the rest of the meltblown range, as PDF.

    Go to downloads
  • Compare the meltblown range

    RO Protect Extreme, RO Protect Prime, RO Protect Eco Plus, RO Protect Ultra, ClaryNira MB

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.