Skip to content

Sintered metal

Clarysynt powder sinteredis a powder sintered metal cartridge and filter tube range in SS 316L. 0.2 to 25 µm.

Powder sintered metal cartridges and filter tubes for high temperature and high pressure process lines. Media, support and hardware are SS 316L, with Hastelloy C-22 or C-276 as an option, in diameters from 50 to 75 mm, lengths from 10" to 60" and 21 end fittings. The rigid structure can be cleaned and reused.

Clarysynt powder sintered, catalogue image

0.2 to 25 µm

Clarysynt powder sintered OD 50 to 75 mm, 10" to 60"

Clarysynt powder sinteredRequest a quote
Retention rating
0.2 to 25 µm
Operating temperature, seal dependent
-192 to 900 °C
Maximum forward pressure
15 to 25 bar
End fittings
21
  • Temperature range

    Rated from -192 °C to 900 °C. The limit in service is set by the seal material.

  • Forward and reverse pressure

    1.5 to 2.5 MPa forward and 0.3 to 0.9 MPa reverse.

  • End fittings

    21 end fittings, from Code-7 and SOE 222 to BSP, NPT and metric threads, plus plain filter tubes.

  • Supply

    Held for ready supply, with a scheduled delivery service for an annual requirement.

How it is built

Construction

  1. Powder sintered media

    Metal powder is sintered into a rigid cylindrical element with a uniform pore distribution.

  2. Metal throughout

    Media, support and hardware in SS 316L, or Hastelloy C-22 or C-276 as an option.

  3. Cartridge or tube

    As a cartridge with one of 21 end fittings, or as a plain filter tube.

Clarysynt powder sintered, catalogue image
MediaPowder sintered SS 316L
DesignCylindrical
O-ringSilicone, FKM, Buna-N, EPDM, PTFE

Specifications

Specification table

MaterialsMedia, hardware, seals

PropertyValue
Media, support, hardwareSS 316L. Hastelloy C-22 / C-276 optional
O-ringSilicone, FKM (Viton), Buna-N, EPDM, PTFE
Media typePowder sintered, cylindrical

PerformanceRetention, temperature, pressure

PropertyValue
Retention rating0.2, 0.5, 1, 2, 5, 10, 20, 25 µm
Operating temperature-192 °C to 900 °C, depending on the seal material
Maximum forward pressure1.5 MPa (15 bar) to 2.5 MPa (25 bar)
Maximum reverse pressure0.3 MPa (3 bar) to 0.9 MPa (9 bar)

DimensionsLengths, diameters, filtration area

PropertyValue
Lengths10", 20", 30", 40", 50", 60"
Diameter50, 54, 60, 63.5, 65, 75 mm (± 1 mm)
Filtration area, 10"50 mm: 0.04 m²; 63 mm: 0.05 m²; 75 mm: 0.06 m²
Filtration area, 20"50 mm: 0.07 m²; 63 mm: 0.1 m²; 75 mm: 0.12 m²
Filtration area, 30"50 mm: 0.11 m²; 63 mm: 0.15 m²; 75 mm: 0.17 m²
Filtration area, 40"50 mm: 0.15 m²; 63 mm: 0.2 m²; 75 mm: 0.23 m²

Ordering codeBuild the part number field by field

PropertyValue
PatternCSPW followed by micron, length, diameter, end fitting, material, hardware and seal codes
MicronA = 0.2; C = 0.5; D = 1; E = 2; G = 5; H = 10; I = 20; J = 25 (µm)
Length10, 20, 30, 40 (inches)
DiameterH = 50 mm; O = 54 mm; P = 63 mm; PP = 65 mm; T = 75 mm
End fitting1 = Fin / 226, Code-7 with fin; 2 = Fin / 222 T1, SOE T1 (45 mm) with fin; 3 = Flat / 226, Code-7 flat end; 4 = Flat / 222 T1, SOE T1 (45 mm) flat; 5 = DOE (with end cap); 6 = Fin / 222 T2, SOE T2 (47 mm) with fin; 7 = Flat / 222 T2, SOE T2 (47 mm) flat; 8 = Fin / 222 T3, SOE T3 (42 mm); 9 = Flat / 222 T3, SOE T3 (42 mm) flat; 14 = 1" BSP (M), SOE TH1; 45 = 1" BSP (M), 2 O-ring; 74 = 2" BSP (M), 2 O-ring; 15 = 1" NPT (M), SOE TH2; 16 = M20, SOE TH3; 17 = M30, SOE TH3; 18 = M40, SOE TH4; 19 = 1/2" BSP (M), SOE TH5; 20 = 1/2" NPT (M), SOE TH6; 21 = 1 3/8" BSP (M), SOE TH7; 22 = G1/4" BSP (M), SOE TH8; 34 = 2" BSP (M)
Material6L = SS 316L
HardwareS6, 6L = SS 316L
SealB = Buna-N; S = silicone; V = FKM; E = EPDM; P = PTFE
Filter tubeCSPWT followed by micron, length, diameter and material codes; material 6L = SS 316L, HAC22 = Hastelloy

Source: Gopani Clarysynt Metallic PM catalogue, 2026, pages 3 to 6.

Where it runs

Where it is used

Industries in the catalogue

Pharmaceuticals and API, refinery, electronics, chemical, petrochemical, power generation, textile, and food and beverages.

Housings

Clary-T CF stainless steel housings take DOE and SOE (222 and 226) cartridges.

“The rigid sintered structure provides uniform pore distribution, high mechanical strength, and stable retention performance under demanding operating conditions.”
Gopani Clarysynt Metallic PM catalogue, 2026, page 3
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Clarysynt powder sintered, as PDF.

  • Gas and air purification1.9 MB · Oct 2026
    Download
  • Oil and gas1.8 MB · Oct 2026
    Download
  • Clarysynt PM2.8 MB · Sep 2026
    Download
  • Sintered products2.7 MB · Aug 2026
    Download
  • Clarywound GF and sintered one-pager0.2 MB · Jan 2026
    Download

Open the full library

Related products and tools

  • Finer ratings

    Kryticalpleat PES is available from 0.1 µm (0.1 to 1 µm).

    View Kryticalpleat PES
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker
  • Housings

    Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.

    View housings and systems

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clarysynt powder sintered catalogue and the rest of the sintered metal range, as PDF.

    Go to downloads
  • Compare the sintered metal range

    Clarysynt culinary steam, Porous metal filters, Clarysparge carbonation stones, Flow restrictors, Fluidizing filters

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.