Skip to content

Meltblown

RO Protect Eco Plushas twice the dirt holding capacity of RO Protect Eco. 1, 5 and 10 µm, standard or jumbo.

A coarse outer layer takes the particle load and a dense inner layer holds the fines. The catalogue rates this construction at twice the dirt holding capacity of RO Protect Eco. Thermally bonded 100% polypropylene, with each cartridge individually packed at Gopani.

RO Protect Eco Plus, catalogue image

1, 5, 10 µm

RO Protect Eco Plus OD 63 or 110 mm, 10" to 40"

RO Protect Eco PlusRequest a quote
Dirt holding
2X RO Protect Eco
Retention rating
1, 5, 10 µm
Recommended change‑out ΔP
1.4 bar (20 psi)
Maximum operating temperature
60 °C
  • Twice the dirt holding

    Rated at twice the dirt holding capacity of RO Protect Eco, for a longer service life on the same duty.

  • Two density layers

    The coarse outer layer loads particles; the dense inner layer retains the fine particulate.

  • No taste, odour or colour

    Binder-free polypropylene processes fluids without imparting taste, odour or colour.

  • Standard or jumbo

    OD 63 mm with ≥ 0.52 ft², or jumbo OD 110 mm with ≥ 0.94 ft², per 10" length.

How it is built

Coarse outside, dense inside, bonded by heat.

  1. Coarse outer layer

    Takes a high particle load at the surface so the cartridge does not blind early.

  2. Dense inner layer

    Retains the fine particulate that passes the outer layer and sets the rating.

  3. Thermally bonded, packed singly

    No resin binders, lubricants, antistatic or release agents. Each cartridge is individually packed at Gopani.

RO Protect Eco Plus, catalogue image
Media100% polypropylene
Core and end capsPolypropylene
SealSilicone, Buna-N

Specifications

Specification table

MaterialsMedia, core, end caps, seals

PropertyValue
Filter mediaPolypropylene, thermally bonded
Core and end capsPolypropylene; plastic end caps optional
O-ring / gasketNone, silicone, Buna-N

PerformanceRetention, dirt holding, pressure

PropertyValue
Retention rating1, 5, 10 µm
Dirt holdingTwice the dirt holding capacity of RO Protect Eco
Maximum operating temperature60 °C (140 °F)
Recommended change-out ΔP1.4 bar (20 psi)
Surface area≥ 0.52 ft² standard, ≥ 0.94 ft² jumbo, per 10" cartridge length

DimensionsDiameters and lengths

PropertyValue
ODStandard 63 ± 0.5 mm, jumbo 110 ± 0.5 mm
ID27.5 ± 0.5 mm
Lengths10", 20", 30", 40"
Box pack50 per box for 10" standard; 25 per box for 20", 30", 40" standard; 20 per box for 10" jumbo; 10 per box for 20" jumbo

Ordering codeBuild the part number field by field

PropertyValue
PatternRPEP- followed by micron, length, diameter, end fitting, material, core, seal
MicronD = 1 µm, G = 5 µm, H = 10 µm
Length10, 20, 30, 40 (inches)
DiameterP = 63 mm, J = 110 mm
End fitting0 = None (DOE without end cap); 1 = Fin / 226, Code-7 with fin; 2 = Fin / 222 T1, SOE T1 (45 mm) with fin; 3 = Flat / 226, Code-7 flat end; 4 = Flat / 222 T1, SOE T1 (45 mm) flat; 5 = DOE (with end cap); 6 = Fin / 222 T2, SOE T2 (47 mm) with fin; 7 = Flat / 222 T2, SOE T2 (47 mm) flat
MaterialPP = polypropylene
CoreX = no core
SealX = none, S = silicone, B = Buna-N

Source: RO Protect Eco Plus catalogue, 2026, p2 to p4. The dirt holding figure is stated against RO Protect Eco; the catalogue gives no gram figure or test method.

Where it runs

Water, RO pre-filtration and process fluids.

Applications

Water and wastewater, reverse osmosis pre-filtration, chemical processing fluids, paints, inks and coatings, food and beverage, and plating and photographic solutions.

Disposal

Spent cartridges can be incinerated, shredded or compacted.

“Twice the dirt holding capacity of RO Protect Eco.”
RO Protect Eco Plus catalogue, 2026, p2
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover RO Protect Eco Plus, as PDF.

  • RO Protect Eco Plus1.6 MB · Sep 2026
    Download

Open the full library

Related products and tools

  • Finer ratings

    RO Protect Extreme is available from 0.5 µm (0.5 to 5 µm).

    View RO Protect Extreme
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker
  • Housings

    Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.

    View housings and systems

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The RO Protect Eco Plus catalogue and the rest of the meltblown range, as PDF.

    Go to downloads
  • Compare the meltblown range

    RO Protect Extreme, RO Protect Prime, RO Protect Eco, RO Protect Ultra, ClaryNira MB

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.