Skip to content

Pleated cartridges

Clarypleat 5000is a pleated glass fibre cartridge for brine, oily water, solvents and fuels. 1 to 10 µm, 30" and 40".

Glass fibre or polypropylene media pleated on a polypropylene core, cage and end caps. The glass fibre media combines surface and depth filtration. Supplied in 30" and 40" lengths with a hard or soft outer cage.

Clarypleat 5000 40 inch pleated cartridge, from the top

1, 2, 5, 10 µm

Clarypleat 5000 OD 63 mm, 30" and 40"

Clarypleat 5000Request a quote
Surface area, 40"
≥ 1.25 m²
Maximum temperature, glass fibre
80 °C
Maximum temperature, polypropylene
65 °C
Change‑out ΔP, hard cage
2.4 kg/cm²
  • Glass fibre media

    Uniform pore construction combining surface and depth filtration.

  • Two media

    Glass fibre to 80 °C, or polypropylene to 65 °C.

  • Hard or soft cage

    Change-out at 2.4 kg/cm² with the hard cage, 2 kg/cm² with the soft cage.

  • Long lengths

    30" and 40" cartridges, OD 63 mm.

How it is built

How it is built

  1. Media

    Glass fibre or polypropylene media is pleated for a large filter area.

  2. Hardware

    The pleat pack is assembled on a polypropylene core with polypropylene end caps.

  3. Outer cage

    A hard or soft polypropylene cage sets the recommended change-out pressure.

Clarypleat 5000 40 inch pleated cartridge, from the top
Filter mediaGlass fibre or polypropylene
Core, cage, end capsPolypropylene
O-ring / gasketEPDM, FKM

Specifications

Specification table

ConstructionMaterials

PropertyValue
Filter mediaGlass fibre or polypropylene
End caps, cage, corePolypropylene
O-ring / gasketEPDM, FKM

Operating limitsAs stated

PropertyValue
Retention rating1, 2, 5, 10 µm
Recommended change-out ΔP2.4 kg/cm² (hard cage); 2 kg/cm² (soft cage)
Maximum operating temperature80 °C glass fibre; 65 °C polypropylene

DimensionsNominal

PropertyValue
Lengths30", 40"
OD / ID63 ± 1.0 mm / 28 ± 0.5 mm
Surface area≥ 1.25 m² per 40" cartridge (OD 63 mm)

Ordering codeBuild the part number field by field

PropertyValue
PatternCP5000- followed by micron, length, diameter, end fitting, filter media, outer cage and seal codes
MicronD = 1 µm; E = 2 µm; G = 5 µm; H = 10 µm
Length30, 40 (inches)
DiameterS = 63 mm
End fitting1 = Flat / 222; 2 = Fin / 222
Filter mediaGF = glass fibre; PP = polypropylene
Outer cageH = hard cage; S = soft cage
SealE = EPDM; V = FKM

Source: Clarypleat 5000 catalogue, Sep 2026, PDF pages 2 and 3. Specification table on page 3.

Where it runs

Where it is used

Process liquids

Industrial process filtration, solvents and chemicals, and brine.

Oils and fuels

Oily water, diesel and fuel filtration.

“Can be used safely in brine, oily water, solvents and acids.”
Clarypleat 5000 catalogue, Sep 2026, p2
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Clarypleat 5000, as PDF.

  • Clarypleat 50001.1 MB · Sep 2026
    Download

Open the full library

Related products and tools

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clarypleat 5000 catalogue and the rest of the pleated cartridges range, as PDF.

    Go to downloads
  • Compare the pleated cartridges range

    Kryticalpleat PES, Kryticalpleat All Fluoropolymer, Clarypleat PES, Clarypleat PTFE, Clarypleat HE, Clarypleat NE, Clarypleat CPU, Clarypleat PVDF, Clarypleat Nylon

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.