Housings and systems
Clary-T SF sanitary housingis a sanitary cartridge housing for Code-7 cartridges. Sloped tube sheet, low point drain, orbital welds.
Sanitary housings for high purity liquid, steam and gas in pharma, food and beverage and biotech. Cartridges lock with a push and twist Code-7 bayonet and retainer plate, the tube sheet slopes to a low point drain, and automated orbital welding keeps the number of welds down. CIP and SIP designs are available.

0.7 MPa, 1/2" to 6"
Clary-T SF sanitary housing Code-7 cartridges, 10" to 40"
- Maximum operating pressure
- 0.7 MPa
- Maximum operating temperature
- 65 °C
- Cartridge
- Code-7, 10" to 40"
- Connections
- 1/2" to 6"
Drains completely
A downward sloping internal tube sheet runs to a low point drain, for low hold-up volume.
Cleanable bayonet
Cut-outs added to the half moon portions of the Code-7 bayonet lock improve cleaning and drainage.
Fewer welds
Automated orbital welding, with quick opening tri-clover clamps on the closure.
CIP and SIP
CIP and SIP designs are available, in T-style and inline configurations.
How it is built
Code‑7 cartridge on a retainer plate
- Code‑7 bayonet
Each cartridge pushes in and twists into a bayonet with a retainer plate, so it cannot be misplaced.
- Sloped tube sheet
The tube sheet slopes down to a low point drain.
- Orbital welds, mirror finish
Automated orbital welding; mirror finish, with electropolish as an option.

| Cartridges | Code-7, 60 to 112 mm OD |
|---|---|
| Closure | Quick opening tri-clover clamps |
| Vent and drain | Flanged or tri-clover, 1/2", 1" |
Specifications
Specification table
MaterialsHousing, clamp, seals
| Property | Value |
|---|---|
| Housing | SS 304, SS 316, SS 316L, duplex SS 2205, duplex SS 2507 |
| Closure clamp | SS 304 |
| O-ring | Silicone, Viton, EPDM, PTFE; others on request |
Operating limitsPressure, temperature, cleaning
| Property | Value |
|---|---|
| Maximum operating pressure | 0.7 MPa (7.0 bar, 101.5 psi) |
| Maximum operating temperature | 65 °C (149 °F) |
| Cleaning | CIP and SIP designs available |
| Design code | ASME Section VIII Division 1, GEP, PED 97/23/EC, CE marking |
| Surface finish | Mirror finish; electropolish optional |
| Inlet and outlet | ASA 150# flange, DIN flange, tri-clover, BS-10 Table 'D', 'E', 'F' flange; 1/2" to 6" |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | CTSF- + design code + no. of cartridges + material + length + connection type + size + O-ring |
| Design code | A = ASME Section VIII Division 1; C = CE mark; G = GEP; P = PED |
| No. of cartridges | 3 digits |
| Material | 04 = SS 304; 4L = SS 304L; 16 = SS 316; 6L = SS 316L; DL = Duplex 2205 |
| Cartridge length | 1 = 10"; 2 = 20"; 3 = 30"; 4 = 40" |
| Connection type | A = ASA 150# flange; D, E, F = BS-10 Table 'D', 'E', 'F' flange; U = DIN flange; V = V-band flange |
| Inlet and outlet size | 34 = 3/4"; 01 = 1"; 15 = 1 1/2"; 02 = 2"; 25 = 2 1/2"; 03 to 06 = 3" to 6" |
| O-ring | B = Buna-N; E = EPDM; S = silicone; V = Viton; T = Teflon encapsulated Viton |
Source: Clary-T SS All Filter Housing catalogue, 2026, p5 and p6.
Where it runs
High purity liquid, steam and gas in pharma, food and biotech
Pharmaceutical, food and beverage and biotech duty on high purity liquid, steam and gas.
Code-7 (226) cartridges, such as Clarypleat PES and Clarypleat PTFE membrane cartridges.

“Downward sloping internal tube sheet with a low point drain.”
Resources for this line
Datasheets and catalogue pages that cover Clary-T SF sanitary housing, as PDF.
- Clary-T SS filter housings2.1 MB · Sep 2026Download
Related products and tools
Above 65 °C
Clary-T Vent is rated to 135 °C.
View Clary-T VentChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checker
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Clary-T SF sanitary housing catalogue and the rest of the housings and systems range, as PDF.
Go to downloads - Compare the housings and systems range
Clary-T CF, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T BF, Clary-T LF, ClarySEA FRP housing, Polyfilt CF, Polyfilt BF, Polyfilt HF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems
Open the family