Housings and systems
Polyfilt BFis a non-metallic housing for one Size 1 or Size 2 filter bag. 30 m³/hr with a Size 2 bag.
A bag filter housing from the Polyfilt uPVC range, for one Size 1 (7" × 16") or Size 2 (7" × 32") filter bag with a polypropylene collar. It connects through a 2" uPVC flange to ASA #150 and runs at up to 6 bar from 4 °C to 60 °C.

18 or 30 m³/hr
Polyfilt BF Size 1 or Size 2 bag
- Typical flow, Size 2
- 30 m³/hr
- Typical flow, Size 1
- 18 m³/hr
- Maximum operating pressure
- 6 bar at 21 °C
- Connection
- 2" flange, ASA #150
Corrosion and rust resistant
A non-metallic body with resistance to chemicals, UV exposure and atmospheric oxidation.
Bag sealed against bypass
The locator and closure design holds the bag collar so fluid does not pass around the bag.
Light to handle
Lightweight construction makes bag change-out and servicing simpler.
Two bag sizes
Size 1 at a typical 18 m³/hr or Size 2 at 30 m³/hr.
How it is built
Construction
- PP collar bag
A Size 1 or Size 2 bag with a polypropylene collar sits on the locator.
- Closure seals the bag
The closure design holds the collar so fluid cannot bypass the bag.
- Flanged connection
2" uPVC flange to ASA #150, inlet and outlet.

| Bags per vessel | 1, PP collar |
|---|---|
| Connection | 2" uPVC flange, ASA #150 |
| Lock | Stainless steel swing nuts |
Specifications
Specification table
MaterialsBody, lock, seal
| Property | Value |
|---|---|
| Housing sump and top | Engineering plastic (PVC) |
| Housing lock | Stainless steel swing nuts |
| O-ring / gasket | Silicone, others on request |
| Bag collar | Polypropylene |
Operating limitsPressure and temperature
| Property | Value |
|---|---|
| Maximum operating pressure | 6 bar (87.02 psid) at 21 °C |
| Hydro-test pressure | 11 bar (159.5 psid) |
| Temperature | 4 °C to 60 °C |
SizesTypical flow, dimensions A, B, C, ØD in mm
| Property | Value |
|---|---|
| Size 1, 7" × 16" | 18 m³/hr; A 175, B 685 ± 10, C 850 ± 10, ØD 225 |
| Size 2, 7" × 32" | 30 m³/hr; A 175, B 1075 ± 10, C 1230 ± 10, ØD 225 |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | POLYFILTBF7DC + size |
| Size | 16 = Size 1 (7" × 16"); 32 = Size 2 (7" × 32") |
Source: Polyfilt uPVC CF, BF and HF catalogue, 2026, p4 and p6. Dimensions in mm.
Where it runs
Chemical processing, effluent treatment and plating lines
Chemical processing; ETP, STP and ZLD systems; plating, pickling and surface treatment; water and wastewater treatment.
A Polyfilt BF ahead of a Polyfilt CF takes the bulk solids before the cartridges, in the same non-metallic range.

“Lightweight construction simplifies bag change-out and servicing.”
Resources for this line
Datasheets and catalogue pages that cover Polyfilt BF, as PDF.
- Polyfilt uPVC CF, BF and HF2.7 MB · Sep 2026Download
Related products and tools
Above 60 °C
Clary-T Vent is rated to 135 °C.
View Clary-T VentChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checker
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Polyfilt BF catalogue and the rest of the housings and systems range, as PDF.
Go to downloads - Compare the housings and systems range
Clary-T CF, Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T BF, Clary-T LF, ClarySEA FRP housing, Polyfilt CF, Polyfilt HF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems
Open the family