Syringe and lab filters
Uni.Q syringe filtersare syringe filters sealed without adhesive. Five membranes, six diameters.
Syringe filters for HPLC sample preparation, pharmaceutical testing, environmental water samples, microbiology and cell culture. PES, nylon, PVDF, PTFE and MCE membranes in a polypropylene housing, ultrasonic or heat sealed with no adhesive, assembled on an automated line with a graded channel design for lower ΔP.

0.22, 0.45, 1.0 µm
Uni.Q syringe filters 4, 13, 25, 30, 33, 50 mm
- Pore sizes
- 0.22, 0.45, 1.0 µm
- Membranes
- 5
- Diameters
- 4 to 50 mm
- Maximum forward pressure
- 4 bar at 25 °C
No adhesive
Ultrasonic or heat sealed, with no adhesive in the housing.
Five membranes
Hydrophilic PES, nylon, PVDF and MCE, and PTFE in hydrophilic and hydrophobic forms.
Sterile or non‑sterile
Uni.Q Advantage without gamma irradiation; Uni.Q Sure gamma irradiated and individually packed.
Pre‑filter layer
The 30 and 33 mm filters carry a glass fibre or PP pre-filter layer for loaded samples.
How it is built
Construction
- Membrane
Chosen for the sample and solvent: PES, nylon, PVDF, PTFE or MCE.
- Graded channels
A graded channel design eases flow and lowers ΔP.
- Sealed and assembled
Ultrasonic or heat sealing on an automated assembly line that minimises human contact.

| Housing | Polypropylene |
|---|---|
| Inlet and outlet | Luer-lock in, luer-slip out |
| Seal | Ultrasonic or heat, no adhesive |
Specifications
Specification table
MaterialsMembrane, housing, pre-filter
| Property | Value |
|---|---|
| Membranes | PES, nylon, PVDF, MCE (hydrophilic); PTFE (hydrophilic and hydrophobic) |
| Housing | Polypropylene |
| Pre-filter, 30 and 33 mm | Glass fibre or PP layer |
| Sealing | Ultrasonic or heat sealed, no adhesives |
| Connection | Luer-lock inlet, luer-slip outlet |
SizesEffective area and sample volume
| Property | Value |
|---|---|
| Pore sizes | 0.22, 0.45, 1.0 µm; others on request |
| Diameters | 4, 13, 25, 30, 33, 50 mm; custom sizes on request |
| 4 mm | 0.12 cm²; about 2 ml |
| 13 mm | 1.3 cm²; about 10 ml |
| 25 mm | 4.9 cm²; about 100 ml |
| 30 mm | 7.0 cm²; about 100 ml |
| 50 mm | 19.6 cm²; more than 100 ml |
| Maximum forward pressure | 4 bar (58 psid) at 25 °C |
SupplyPacks and sterility
| Property | Value |
|---|---|
| Uni.Q Advantage | Non-sterile, no gamma irradiation; packs of 100, 250, 500 |
| Uni.Q Sure | Pre-sterilized by gamma irradiation; 50 pieces, individually packed in peelable pouches |
| Manufacturing facility | ISO 9001:2015, ISO 14001 and ISO 45001 (Integrated Management System) |
Source: Uni.Q syringe filter catalogue, PDF pages 2 and 3, and the Uni.Q syringe filter one-pager.
Where it runs
Sample preparation for HPLC, pharma QC and environmental testing
HPLC and ion chromatography sample preparation; particulate removal from drug substances and excipients before analysis; water samples in environmental testing; microbiology and cell culture samples.
About 2 ml through a 4 mm filter, about 10 ml through 13 mm, about 100 ml through 25 or 30 mm, and more than 100 ml through 50 mm.

“Ultrasonic or heat sealed, with no adhesives.”
Resources for this line
Datasheets and catalogue pages that cover Uni.Q syringe filters, as PDF.
Related products and tools
Chemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checkerHousings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Uni.Q syringe filters catalogue and the rest of the syringe and lab filters range, as PDF.
Go to downloads - Compare the syringe and lab filters range
HPLC solvent inlet filters
Open the family