Skip to content

Housings and systems

Clary-T CFis a range of stainless steel cartridge housings, single and multi-round. Five configurations, nine materials.

Single and multi-round cartridge housings in SS 304, 316 and 316L, duplex, carbon and mild steel, with rubber lined options. A top-seated O-ring with positive tangential contact keeps every cartridge aligned and prevents internal bypass, and each housing is hydrostatically tested before dispatch.

Clary-T CF, catalogue image

0.7 MPa, higher on request

Clary-T CF 10" to 40" cartridges, 60 to 112 mm OD

Clary-T CFRequest a quote
Maximum operating pressure
0.7 MPa, higher on request
Maximum operating temperature
65 °C, higher on request
Cartridge OD
60 to 112 mm
Connections
1/2" to 12"
  • Sealed against internal bypass

    A top-seated O-ring with positive tangential contact keeps the cartridges aligned and sealed.

  • Tested before dispatch

    Each housing is hydrostatically tested before it leaves the plant.

  • Material for the fluid

    SS 304, 316 and 316L, duplex 2205 and 2507, carbon and mild steel, and rubber lined carbon and mild steel.

  • Design codes

    ASME Section VIII Division 1, PED 97/23/EC and CE marking, or GEP.

How it is built

Five configurations, one sealing arrangement

  1. Configuration

    ML, M2 and U2 take DOE cartridges, inline or standard; M1 and U1 take SOE cartridges.

  2. Top‑seated O‑ring

    Positive tangential contact holds each cartridge in line, so fluid cannot bypass it.

  3. Closure and finish

    V-band or bolted closure; matt, mirror, electropolished or glass bead blasted surfaces.

Clary-T CF, catalogue image
CartridgesDOE, SOE (fin or flat, 222 or 226)
ClosureV-band or bolted
Vent and drainNPT, BSP 1/2" to 1"; tri-clover 1/2", 1"

Specifications

Specification table

MaterialsHousing, clamp, seals

PropertyValue
HousingSS 304, SS 316, SS 316L, duplex SS 2205, duplex SS 2507, CS, MS, CSRL, MSRL
Closure clampSS 304
O-ringSilicone, FKM, EPDM, PTFE; others on request

Operating limitsPressure and temperature

PropertyValue
Maximum operating pressure0.7 MPa (7.0 bar, 101.5 psi); higher on request
Maximum operating temperature65 °C (149 °F); higher on request
Design codeASME Section VIII Division 1, GEP, PED 97/23/EC, CE marking
Surface finish, interior and exteriorMatt, mirror, electropolish, glass bead blasted

ConfigurationsHousing types

PropertyValue
MLMulti-round, double open end, inline
M1Multi-round, single open end
M2Multi-round, double open end, standard
U1Single-round, single open end
U2Single-round, double open end, inline
Cartridge lengths10", 20", 30", 40"
Cartridge endsDOE; SOE Fin/222, Fin/226, Flat/222, Flat/226
Inlet and outletBSP, NPT, DIN flange, ASA 150# flange, BS-10 Table 'D', 'E', 'F' flange, tri-clover; 1/2" to 12"

Ordering codeBuild the part number field by field

PropertyValue
PatternCTCF- + housing type + design code + no. of cartridges + length + cartridge type + material + connection type + size + O-ring
Housing typeU1; U2; M1; M2; ML
Design codeA = ASME Section VIII Division 1; C = CE mark; G = GEP; P = PED
No. of cartridges3 digits
Cartridge length1 = 10"; 2 = 20"; 3 = 30"; 4 = 40"
Cartridge typeDOE; SOE Fin/222, Fin/226, Flat/222 or Flat/226
Material04 = SS 304; 4L = SS 304L; 16 = SS 316; 6L = SS 316L; DL = Duplex 2205; SD = Duplex 2507; CS; MS; CL = CSRL; ML = MSRL
Connection typeA = ASA 150# flange; D, E, F = BS-10 Table 'D', 'E', 'F' flange; U = DIN flange; B = BSP socket; N = NPT socket; V = tri-clover
Connection size05 = 1/2"; 34 = 3/4"; 01 = 1"; 15 = 1 1/2"; 02 = 2"; 25 = 2 1/2"; 3, 4, 5, 6, 8, 10, 12 = inches
O-ringB = Buna-N; E = EPDM; S = silicone; V = FKM; T = PTFE

Source: Clary-T CF housing catalogue, 2026, p2 to p4, and the Clary-T SS All Filter Housing catalogue, 2026, p2 to p4.

Where it runs

Process liquids in stainless or coded vessels

Choosing the configuration

DOE cartridges in ML, M2 or U2; SOE cartridges with 222 or 226 ends in M1 or U1.

Sizing

Send us the flow, the fluid and the cartridge you run, and we size the vessel and the number of rounds.

“Each housing is hydrostatically tested prior to dispatch.”
Clary-T CF housing catalogue, 2026
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Clary-T CF, as PDF.

  • Clary-T CF housing4.9 MB · Sep 2026
    Download
  • Clary-T SS filter housings2.1 MB · Sep 2026
    Download

Open the full library

Related products and tools

  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clary-T CF catalogue and the rest of the housings and systems range, as PDF.

    Go to downloads
  • Compare the housings and systems range

    Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T BF, Clary-T LF, ClarySEA FRP housing, Polyfilt CF, Polyfilt BF, Polyfilt HF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.