Pleated cartridges
Kryticalpleat All Fluoropolymerhas every wetted part in fluoropolymer. Rated to 160 °C.
Part of Kryticalpleat, the Gopani range for critical applications, made with a higher grade of membrane. A high-purity hydrophobic PTFE membrane on fluoropolymer supports, cage, core and end caps, joined by hot melt welding. Designed for demanding chemical, temperature and contamination control duty and for aggressive gas filtration. Suitability is reviewed for each application against process chemistry, concentration, temperature, pressure and required retention.

0.2, 0.45, 1.0 µm
Kryticalpleat All Fluoropolymer OD 69 mm, 10" to 40"
- Wetted construction
- All fluoropolymer
- Maximum operating temperature
- 160 °C
- Maximum forward ΔP
- 4.3 bar at 25 °C
- Membrane area
- ≥ 0.7 m² per 10"
Fluoropolymer wetted parts
Membrane, supports, cage, core and end caps are all fluoropolymer.
Hot service
Maximum operating temperature of 160 °C.
Hot melt welded
Components are joined by hot melt welding in a clean workshop.
Aggressive gases
The catalogue states the cartridge is designed for aggressive gas filtration.
How it is built
Construction
- Hydrophobic PTFE membrane
A high-purity hydrophobic PTFE membrane sets the removal rating.
- Fluoropolymer support and hardware
Supports, cage, core and end caps are fluoropolymer.
- Hot melt welded
Parts are joined by hot melt welding in a clean workshop.

| Membrane | Hydrophobic PTFE |
|---|---|
| Supports and hardware | Fluoropolymer |
| Seal | Buna-N, EPDM, FEP encapsulated silicone |
Specifications
Specification table
MaterialsEvery wetted part
| Property | Value |
|---|---|
| Filter membrane | Hydrophobic PTFE |
| Supports | Fluoropolymer |
| Cage, core, end caps | Fluoropolymer |
| Joining | Hot melt welding, clean workshop production |
PerformanceRating, temperature, pressure
| Property | Value |
|---|---|
| Removal rating | 0.20, 0.45, 1.0 µm |
| Maximum operating temperature | 160 °C |
| Maximum differential pressure, forward | 4.3 bar at 25 °C |
| Maximum reverse pressure | 3 bar at 25 °C |
| Membrane surface area | ≥ 0.7 m² per 10" |
| Air flow | Pressure drop against air flow chart for 0.2 µm, 10", at vent, 1, 2 and 3 bar, in the catalogue |
DimensionsΦ69 GP series, 222 / flat
| Property | Value |
|---|---|
| OD | 69 mm; adapter Ø45.5 mm |
| 10" | A 263.3 ± 2 mm; B 240.9 ± 2 mm |
| 20" | A 506.7 ± 4 mm; B 484.3 ± 4 mm |
| 30" | A 750.1 ± 6 mm; B 727.7 ± 6 mm |
| 40" | A 993.5 ± 8 mm; B 971.1 ± 8 mm |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | KPPTFE- followed by micron, length, diameter, end fitting, hardware and seal codes |
| Micron | A = 0.2 µm; B = 0.45 µm; D = 1 µm |
| Length | 10, 20, 30, 40 (inches) |
| Diameter | S = 69 mm |
| End fitting | 2 = Fin / 222; 4 = Flat / 222 |
| Hardware | Fluoropolymer |
| Seal | B = Buna-N; E = EPDM; W = FEP encapsulated silicone |
Source: Kryticalpleat All Fluoropolymer catalogue, edition 16 Oct 2026, PDF pages 2 and 3. It supersedes the Kryticalpleat All PTFE digital catalogue, which shares the KPPTFE code and drawing.
Where it runs
Aggressive chemicals, hot service and aggressive gases
Demanding chemical, temperature and contamination control applications, and aggressive gas filtration. Each application is reviewed against chemistry, concentration, temperature, pressure and retention.
Both use a hydrophobic PTFE membrane. Kryticalpleat All Fluoropolymer is the critical application cartridge, with a higher grade of membrane and fluoropolymer supports and hardware; Clarypleat PTFE has polypropylene supports and hardware, with PFA hardware as an ordering option.

“Kryticalpleat All Fluoropolymer filters combine a high purity PTFE membrane with fluoropolymer support and structural hardware.”
Questions
Kryticalpleat All Fluoropolymer: common questions
- Is Kryticalpleat All PTFE a different product?
- No. The All PTFE and All Fluoropolymer catalogues share the KPPTFE ordering code, drawing, dimension table and pressure limits. All Fluoropolymer is the later edition, and its figures apply.
- How is suitability for a process confirmed?
- By application review. The catalogue asks for the process chemistry, concentration, temperature, pressure and required retention.
Resources for this line
Datasheets and catalogue pages that cover Kryticalpleat All Fluoropolymer, as PDF.
Related products and tools
Above 160 °C
Fluidizing filters is rated to 600 °C.
View Fluidizing filtersFiner ratings
Kryticalpleat PES is available from 0.1 µm (0.1 to 1 µm).
View Kryticalpleat PESChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checkerHousings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Kryticalpleat All Fluoropolymer catalogue and the rest of the pleated cartridges range, as PDF.
Go to downloads - Compare the pleated cartridges range
Kryticalpleat PES, Clarypleat PES, Clarypleat PTFE, Clarypleat HE, Clarypleat NE, Clarypleat CPU, Clarypleat PVDF, Clarypleat Nylon, Clarypleat 5000
Open the family