Skip to content

Industry

Filtration for electroplating and surface treatment, from cleaning and pickling to the plating bath, rinse water and effluent.

Gopani supplies filter cartridges and corrosion-resistant housings for plating baths, pre-treatment chemicals, rinse water and effluent. Selection starts from your bath chemistry and temperature: send them, and an application engineer replies with what fits.

  • Cleaning and picklingScale and sludge from the work held back, in housings the acid does not attack.
  • Plating bathsParticles kept out of the deposit, so parts are not rejected for roughness or pits.
  • Rinse and make-up waterClean rinse water, and the RO that makes it protected from its feed.
  • EffluentEffluent filtered before discharge or reuse, in ETP and ZLD systems.

Selection

What decides the filter for a plating bath.

Media, core and seal are chosen for the bath, and chemical compatibility is checked for each application. These are the details that decide it.

Bath
Metal and bath type, the chemistry and its concentration, and pH.
Temperature
Operating temperature. Each wound medium and core has its own maximum, so the temperature narrows the choice first.
Flow
Tank volume, the turnover you run today and the pump on the filter loop.
Today
The filter cartridge, rating and housing in use now, and how often it is changed.

Troubleshooting

Common challenges

What each problem looks like on the line, what usually causes it, and the first two things to check.

Stage 2, plating bath filtration

Likely causes

  • Bath turnover through the filter too low for the solids the bath picks up
  • Filter cartridges left in service past their capacity, so solids pass or bypass
  • Solids carried in from the previous tank or shed from anode bags

Check first

  1. Bath turnover through the filter per hour
  2. Differential pressure across the filter cartridges and when they were last changed

What the right fix depends on

The bath chemistry and volume, the solids it picks up, the finish the deposit needs, and the pump and housing you have.

Ask an application engineer: Rough or pitted deposits

The Gopani filter for this duty:String Wound Filter Cartridges

Related catalogues

Product data and test methods for the lines used in this industry, sent by email on request.

  • RO Protect Eco1.2 MB · Sep 2026
    Request
  • RO Protect Eco Plus1.6 MB · Sep 2026
    Request
  • Plastofilt CF and BF1.2 MB · Jun 2026
    Request
  • Clarywound Extreme0.2 MB · Apr 2026
    Request
  • Clarywound Ultra0.3 MB · Apr 2026
    Request
  • Clarypleat HE0.6 MB
    Request

Open the full library

Send us one process stage. Get back the right filter, its documentation and a price.

Tell us the process stage, the fluid and the flow, and the filter you use now: a part number, a photograph or a drawing is enough. An application engineer replies with the Gopani product that fits, its documentation and a quotation.

Request a quote

Request a catalogue

Tell us who you are and where to send it. Our team emails the catalogue to you.

By sending this you agree to our Privacy notice.