Housings and systems
Polyfilt HFis a non-metallic housing for one 6" × 60" high flow cartridge. 40 m³/hr at 6 bar.
A housing from the Polyfilt range for a single 6" OD, 60" high flow SOE cartridge, with 3" Victaulic ends. The catalogue positions it as a replacement for stainless steel housings in RO, desalination and corrosive process water duty.

40 m³/hr typical
Polyfilt HF 1 × 6" × 60" cartridge
- Typical flow
- 40 m³/hr
- Maximum operating pressure
- 6 bar at 21 °C
- Hydro‑test pressure
- 10 bar
- Temperature
- 4 to 45 °C
For aggressive environments
A non-metallic body with resistance to UV and atmospheric oxygen, for service where stainless steel housings corrode.
One element to change
A single 6" × 60" high flow cartridge per vessel at a typical 40 m³/hr.
Sealed against bypass
The locator and closure design keeps fluid from bypassing the cartridge.
Readily available
Polyfilt housings are held for supply, with a scheduled delivery service for the annual cartridge requirement.
How it is built
Construction
- High flow SOE cartridge
One 6" OD, 60" SOE high flow cartridge per vessel.
- Clamped closure
A stainless steel clamp and bolt lock the top; the locator and closure design prevents bypass.
- Victaulic ends
3" Victaulic inlet and outlet.

| Cartridge | 1 × 6" OD × 60", SOE |
|---|---|
| Connection | 3" Victaulic end |
| Lock | Stainless steel clamp and bolt |
Specifications
Specification table
MaterialsBody, lock, seal
| Property | Value |
|---|---|
| Housing sump and top | Engineering plastic (PVC) |
| Housing lock | Stainless steel clamp and bolt |
| O-ring / gasket | Silicone or EPDM |
Operating limitsFlow, pressure, temperature
| Property | Value |
|---|---|
| Typical flow | 40 m³/hr |
| Maximum operating pressure | 6 bar (87.02 psid) at 21 °C |
| Hydro-test pressure | 10 bar (145 psid) |
| Temperature | 4 °C to 45 °C |
SizeDimensions L, L1, L2, ØD in mm
| Property | Value |
|---|---|
| 60" × 1 | L 1925, L1 1645, L2 1100, ØD 230 |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | POLYFILTHF + size + connection + material + seal |
| Size | 1HF60 = 60" × 1 |
| Connection | 3V = 3" Victaulic end |
| Material | UPVC = uPVC |
| Seal | EPDM = EPDM |
Source: Polyfilt HF catalogue, 2026, p3 and p4, and the Polyfilt uPVC CF, BF and HF catalogue, 2026, p5 and p6. Dimensions in mm.
Where it runs
RO, desalination and corrosive process water
Reverse osmosis systems, desalination plants, water treatment systems, chemical processing and corrosive fluids, and industrial process and utility water.
The typical flow of this housing is 40 m³/hr. RO Protect HF is rated up to 1900 LPM of water per element, so the housing figure is the one to size against.

“Polyfilt HF can most effectively replace your stainless steel filter housing.”
Resources for this line
Datasheets and catalogue pages that cover Polyfilt HF, as PDF.
Related products and tools
Above 45 °C
Clary-T Vent is rated to 135 °C.
View Clary-T VentChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checker
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Polyfilt HF catalogue and the rest of the housings and systems range, as PDF.
Go to downloads - Compare the housings and systems range
Clary-T CF, Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T BF, Clary-T LF, ClarySEA FRP housing, Polyfilt CF, Polyfilt BF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems
Open the family