Skip to content

Pleated cartridges

Kryticalpleat PESis the sterilizing-grade PES cartridge for critical applications. Every cartridge is integrity tested before it ships.

Kryticalpleat is the Gopani range for critical applications. Kryticalpleat PES is made with a higher grade of asymmetric hydrophilic PES membrane, thermally sealed without adhesives and manufactured in a clean room. Every cartridge is integrity tested before it ships and is traceable by serial number.

Kryticalpleat PES, catalogue image

0.1, 0.2, 0.45, 1 µm

Kryticalpleat PES OD 69 mm, 5" to 40"

Kryticalpleat PESRequest a quote
Bacterial retention, 0.2 µm
≥ 10⁷ B. diminuta per cm²
Minimum bubble point
≥ 3.3 bar
Steam in place
30 cycles at 134 °C
Integrity tested
100% of cartridges
  • Higher grade membrane

    Made with a higher grade of asymmetric hydrophilic PES membrane, for critical sterilizing filtration.

  • Tested before shipment

    Every cartridge is integrity tested before it ships and is traceable by serial number.

  • Steam in place

    30 SIP cycles at 134 °C (20 min) or 30 cycles at 124 °C (30 min).

  • Low protein binding

    The PES membrane binds little protein, which keeps product recovery up.

How it is built

Construction

  1. Asymmetric PES membrane

    A higher grade of hydrophilic PES that sets the microbial retention: ≥ 10⁷ B. diminuta per cm² at 0.2 µm (ASTM F838).

  2. Polypropylene support and hardware

    Support layer, cage, core, end caps and adapters are polypropylene.

  3. Thermally sealed, clean room made

    Sealed without adhesives, then manufactured, tested and packed in a clean room under an ISO 9001 quality management system.

Kryticalpleat PES, catalogue image
MembraneAsymmetric hydrophilic PES
HardwarePolypropylene
O-ringSilicone, EPDM

Specifications

Specification table

MaterialsMembrane, support, hardware

PropertyValue
MembraneHydrophilic polyethersulfone (PES), asymmetric
Support layerPolypropylene
Cage, core, end caps, adaptersPolypropylene
O-ringSilicone, EPDM
SealingThermal sealing, no adhesives

IntegrityPer 10" cartridge

PropertyValue
Minimum bubble point at 25 °C≥ 3.3 bar, wetting liquid DI water
Maximum air diffusion at 25 °C≤ 18 ml at 2.6 bar, per 10"
Bacterial retention, 0.2 µm≥ 10⁷ Brevundimonas diminuta per cm² (ASTM F838)
Bacterial retention, 0.45 µm≥ 10⁷ Serratia marcescens per cm²
Integrity testingEvery cartridge, before shipment; traceable by serial number

Operating limitsTemperature, pressure, steam

PropertyValue
Maximum operating temperature80 °C continuous
Maximum differential pressure, forward5.2 bar at 25 °C
Maximum differential pressure, reverse2.1 bar at 25 °C
Water flow20 L/min at 0.2 bar, 25 °C
Steam in place30 cycles at 134 °C (20 min cycles); 30 cycles at 124 °C (30 min cycles)
Steam exposure, integrity maintainedUp to 134 °C at up to 0.5 bar forward ΔP

DimensionsLengths and area

PropertyValue
OD69 mm
Lengths5", 10", 15", 20", 30", 40"
Effective filtration area, nominal0.32, 0.65, 1.0, 1.3, 1.95 m² for 5", 10", 15", 20", 30"

Quality assuranceAs printed in the catalogue

PropertyValue
Bacterial endotoxin≤ 0.25 EU/ml, LAL test
Cytotoxicity and biological reactivityMeets USP <87> and <88>, Class VI
ExtractablesEvaluated per USP <661>; with WFI < 40 mg per 10" after autoclaving
Particulate matterEvaluated per USP <788>
Fibre releaseMeets 21 CFR 210.3(b)(6)
Flushed waterTOC ≤ 0.5 mg/l; conductivity ≤ 5.1 µS/cm
Indirect food additives21 CFR 177, (EU) No. 1935/2004, (EU) No. 10/2011
Manufacturing facilityISO 9001, ISO 14001 and ISO 45001 certified (Integrated Management System)

Ordering codeBuild the part number field by field

PropertyValue
PatternKPPES- followed by micron, length, diameter, end fitting, hardware and seal codes
MicronX = 0.1 µm; A = 0.2 µm; B = 0.45 µm; D = 1 µm
Length05, 10, 15, 20, 30, 40 (inches)
DiameterS = 69 mm
End fitting1 = Fin / 226; 2 = Fin / 222; 3 = Flat / 226; 4 = Flat / 222
HardwarePP = polypropylene
SealE = EPDM; S = silicone; V = Viton

Source: Kryticalpleat PES catalogue, PDF pages 2 to 5. Specification table on page 4.

Where it runs

Sterilizing filtration of biologicals, parenterals, pharma water and beverages

Biopharma

Complex formulations, vaccines, biological products, serum and plasma, cell culture media and SVPs.

Pharma and pharma water

LVPs, APIs, buffers, disinfectants and ophthalmic solutions; WFI, highly purified water and ultrapure water.

Beverages

Beer, spirits, wine, juices and purified water.

“Kryticalpleat cartridge filters are 100% integrity tested before they are shipped.”
Kryticalpleat PES catalogue, p3
See the catalogues

Questions

Kryticalpleat PES: common questions

Is every Kryticalpleat PES cartridge integrity tested?
Yes. Kryticalpleat cartridges are 100% integrity tested before they are shipped, and each filter is traceable by serial number.
How does it differ from Clarypleat PES?
Kryticalpleat is the range for critical applications and is made with a higher grade of membrane; it runs to 40" long. Clarypleat PES is a sterilizing-grade cartridge for general process duty in buffers, media, intermediates and final aqueous formulations, to 30" long. Both catalogues print the same specification table.
Is there a validation guide?
Yes. The catalogue states that a validation guide for compliance with regulatory requirements is available.

Resources for this line

Datasheets and catalogue pages that cover Kryticalpleat PES, as PDF.

Open the full library

Related products and tools

  • Pre-filtration for this membrane

    ClaryNira MB: meltblown pp with microban® product protection, 1 to 100 µm.

    View ClaryNira MB
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker
  • Housings

    Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.

    View housings and systems

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Kryticalpleat PES catalogue and the rest of the pleated cartridges range, as PDF.

    Go to downloads
  • Compare the pleated cartridges range

    Kryticalpleat All Fluoropolymer, Clarypleat PES, Clarypleat PTFE, Clarypleat HE, Clarypleat NE, Clarypleat CPU, Clarypleat PVDF, Clarypleat Nylon, Clarypleat 5000

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.