Skip to content

Sintered metal

Sensor probe protectionare sintered 316L housings that let a sensor read the process and keep particles out.

Sensor housings in sintered 316L stainless steel powder for temperature and humidity monitoring. The housing shields the sensor from physical and environmental harm, reduces external disruption and gives an anchor point for secure installation. Housings are designed with you for your device through an OEM service.

Principle diagram: a porous metal cap around the sensor probe lets gas or liquid reach the sensor and keeps particles out

Sintered 316L

Sensor probe protection Made to your device

Sensor probe protectionRequest a quote
Material
Sintered 316L stainless steel powder
Protection
Dust, high temperature, pressure, corrosion
Pores
Uniform
Service
OEM sensor housing design
  • High strength

    The sturdy sintered structure removes the need for additional brackets.

  • Environment resilient

    Dust-proof, and resistant to high temperature, pressure and corrosion.

  • Uniform pores

    An even pore structure for more accurate testing and humidity monitoring.

  • Reusable

    The housing is easy to clean and can be used again.

How it is built

How it works

  1. Porous cap

    A sintered 316L housing closes over the sensing end of the probe.

  2. Process reaches the sensor

    Gas or moisture passes through the pores to the sensor.

  3. Particles stay out

    Dust and particles are held outside the housing, which protects the sensor.

HousingSintered 316L stainless steel powder
DesignOEM, to your device
MountingAnchor point for secure installation

Specifications

Specification table

As statedMaterial, uses, service

PropertyValue
MaterialSintered 316L stainless steel powder
ProtectionDust-proof; high temperature, pressure and corrosion resistant
ApplicationsProtective covers for humidity sensors and temperature sensor probes; pH and ORP sensor housings; dew point transmitter probe covers; gas sensor housings; outdoor temperature sensor housings; explosion-proof gas detectors; other probe housings
SectorsEnvironmental protection and detection, petroleum, natural gas, chemicals, instrumentation, pharmaceutical equipment
OEM serviceSensor housing and humidity probe design, from first consultation to shipment and user training
Sizes and pore gradeSet for each device with an application engineer

Source: Gopani flow restrictor catalogue, page 2. That catalogue is not offered for download; ask an application engineer for the datasheet.

Where it runs

Where it is used

Probes

Humidity, temperature, dew point, gas, pH and ORP sensor probes, including outdoor and explosion-proof gas detectors.

To replace a housing

Send the probe drawing or the housing you use today, the medium and the operating conditions.

Resources for this line

Ask an application engineer for the datasheet.

Contact an application engineer

Related products and tools

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    Catalogues for the sintered metal range, as PDF.

    Go to downloads
  • Compare the sintered metal range

    Clarysynt powder sintered, Clarysynt culinary steam, Clarysparge carbonation stones, Flow restrictors, Fluidizing filters, Pneumatic silencers and mufflers, High purity and high pressure compressed air and gas filters, Clarysynt multilayer sintered mesh

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.