Pleated cartridges
Clarypleat NEis a nominal-rated pleated cartridge for raw water and pre-filtration. 5 to 100 µm.
A pleated cartridge in polypropylene or polyester media, for applications that need low pressure drop and high flow. The pleated surface gives a larger filtration area and a longer service life, with fewer change-outs. Standard 68 mm and jumbo 114 mm diameters.

5 to 100 µm nominal
Clarypleat NE OD 68 or 114 mm, 10" to 40"
- Retention rating, nominal
- 5 to 100 µm
- Maximum operating temperature
- 55 °C
- Recommended change‑out ΔP
- 1.8 bar at 55 °C
- Collapse pressure
- 2.8 bar
Fewer change‑outs
The pleated surface gives a greater filtration area and a longer service life.
Jumbo option
OD 114 mm jumbo in 10" and 20" lengths, alongside the 68 mm standard.
Two media
Polypropylene or polyester, to suit the fluid.
Four seal elastomers
Buna-N, silicone, Viton or EPDM, with DOE, fin or flat 222 ends.
How it is built
Construction
- Pleated media
Polypropylene or polyester media, pleated to increase the area in the housing.
- Nominal rating
5, 10, 20, 50 or 100 µm, for raw water and pre-filtration.
- Standard or jumbo
68 mm in 10" to 40", or 114 mm jumbo in 10" and 20".

| Media | Polypropylene or polyester |
|---|---|
| End caps | Polyurethane |
| Seal | Silicone, Viton, Buna-N, EPDM |
Specifications
Specification table
MaterialsMedia, end caps, seals
| Property | Value |
|---|---|
| Filter media | Polypropylene (PP), polyester (PE) |
| End caps | Polyurethane (PU) |
| O-ring / gasket | Silicone, Viton, Buna-N, EPDM |
PerformanceRetention, temperature, pressure
| Property | Value |
|---|---|
| Retention rating, nominal | 5, 10, 20, 50, 100 µm |
| Maximum operating temperature | 55 °C (131 °F) |
| Recommended change-out ΔP | 0.18 MPa (1.8 bar; 26.1 psid) at 55 °C |
| Collapse pressure | 2.8 bar (40.6 psid) |
| Surface area, standard and jumbo | ≥ 0.52 ft² per 10" cartridge length; higher surface area on request |
DimensionsDiameters and lengths
| Property | Value |
|---|---|
| OD, standard | 68 ± 0.5 mm, lengths 10", 20", 30", 40" |
| OD, jumbo | 114 ± 0.5 mm, lengths 10", 20" |
| ID | 28 ± 0.5 mm |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | CPNE- followed by micron, length, diameter, end fitting, material, core and seal codes |
| Micron | D = 5 µm; E = 10 µm; F = 20 µm; G = 50 µm; I = 100 µm |
| Length | 10, 20, 30, 40 (inches) |
| Diameter | S = 68 mm; J = 114 mm |
| End fitting | 0 = none (DOE without end cap); 1 = Fin / 222; 2 = Flat / 222 |
| Material | PP = polypropylene; PE = polyester |
| Core | X = no core |
| Seal | B = Buna-N; S = silicone; V = Viton; E = EPDM |
Source: Clarypleat NE catalogue, 2026, PDF pages 2 to 4. NE micron codes differ from other Clarypleat lines: D is 5 µm here.
Where it runs
Raw water treatment and pre-filtration
Raw water treatment and pre-filtration, in non-demanding applications that need high flow at low pressure drop.
For ratings down to 0.22 µm, temperatures to 80 °C or food contact components, see Clarypleat HE.

“Pleated surface results in greater filtration area, providing longer service life.”
Resources for this line
Datasheets and catalogue pages that cover Clarypleat NE, as PDF.
- Clarypleat NE10.8 MB · Sep 2026Download
Related products and tools
Above 55 °C
Kryticalpleat All Fluoropolymer is rated to 160 °C.
View Kryticalpleat All FluoropolymerFiner ratings
Clarypleat PVDF is available from 0.45 µm (0.1, 0.22, 0.45 µm).
View Clarypleat PVDFChemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checkerHousings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The Clarypleat NE catalogue and the rest of the pleated cartridges range, as PDF.
Go to downloads - Compare the pleated cartridges range
Kryticalpleat PES, Kryticalpleat All Fluoropolymer, Clarypleat PES, Clarypleat PTFE, Clarypleat HE, Clarypleat CPU, Clarypleat PVDF, Clarypleat Nylon, Clarypleat 5000
Open the family