Skip to content

Depth modules

Lenticular depth filtersare cellulose depth filter modules for clarifying wine, beer, juice and spirits. Nine grades, 0.1 to 50 µm.

Modules of 16 cells stacked on a centre core, each cell two depth filter sheets with a polypropylene separator on the downstream side and a polypropylene edge seal. The DE series combines cellulose fibres with filter aids such as diatomaceous earth and perlite; the PC series is pure cellulose, with ash content below 1%.

Lenticular depth filters, catalogue image

0.1 to 50 µm

Lenticular depth filters 12" and 16", 16 cells

Lenticular depth filtersRequest a quote
Filtration area, 12" / 16"
1.7 / 4.0 m²
Retention range
0.1 to 50 µm
Maximum ΔP
2.4 bar at 25 °C
Recommended flow
< 20 L/min/m²
  • Nine grades

    From STKP-Y-9 at 0.1 to 0.2 µm to PC 03 at 25 to 50 µm.

  • Two diameters

    Sixteen cells on a centre core, in 12" and 16" sizes.

  • Autoclavable

    30 minutes at 121 °C, with ΔP held to 0.35 bar during steaming.

  • Low ash grades

    PC series pure cellulose grades have ash content below 1%, for products sensitive to heavy metals.

How it is built

Construction

  1. Depth sheets

    Each cell holds two cellulose depth filter sheets; flow runs from the outer surface inwards.

  2. Separator and seal

    A PP separator on the downstream side and a PP edge seal bind the two sheets into one cell.

  3. Module

    16 cells on a centre core, locked by end adapters: double open end or double O-ring.

Lenticular depth filters, catalogue image
MediaCellulose, with or without filter aids
PlasticsPolypropylene
GasketSilicone; NBR, FKM optional

Specifications

Specification table

DE seriesCellulose with inorganic filter aids

PropertyValue
200, STKP-Y-412 µm; 1400 g/m²; 235; ash 52.5%; coarse clarification
100, STKP-Y-53 to 7 µm; 1300 g/m²; 197; ash 51.8%; coarse clarification
050, STKP-Y-61 to 5 µm; 1450 g/m²; 90; ash 44.2%; medium clarification
010, STKP-Y-70.6 to 1.0 µm; 1300 g/m²; 76; ash 48.3%; medium clarification
005, STKP-Y-80.2 to 0.5 µm; 1450 g/m²; 54; ash 48.0%; fine clarification
002, STKP-Y-90.1 to 0.2 µm; 1550 g/m²; 48; ash 49.2%; fine clarification

PC seriesPure cellulose

PropertyValue
500, PC 0325 to 50 µm; 950 to 1000 g/m²; 829; ash < 1%; coarse clarification
400, PC 0620 to 40 µm; 1050 to 1100 g/m²; 760; ash < 1%; coarse clarification
300, PC 0810 to 30 µm; 1100 to 1200 g/m²; 407; ash < 1%; coarse clarification

ModuleSize and limits

PropertyValue
12" (282 mm design)16 cells; 1.7 m²
16" (425 mm design)16 cells; 4.0 m²
Total height, both sizes275 mm double open end; 330 mm double O-ring
Maximum ΔP2.4 bar (35 psi) at 25 °C
Maximum temperature80 °C (176 °F)
Recommended flow< 20 L/min/m²; rinse 50 L/m²
SterilisationAutoclave 30 min at 121 °C; maximum ΔP during steaming 0.35 bar

Ordering codeBuild the part number field by field

PropertyValue
PatternCRDS- followed by media, adaptor, size, gasket, cells and use codes
Media codeFrom the grade tables, for example 050
AdaptorD = double open end (flat adaptor); S = double O-ring
Size12 = 12"; 16 = 16"
GasketS = silicone; N = NBR; V = FKM
Cells16; modules with fewer cells on request
UseG = general use

Source: Lenticular depth filter catalogue, PDF pages 2 to 4. Retention in µm, nominal; mass g/m²; thickness 3.6 to 4.0 mm for every grade; typical water permeability L/min/m²; ash %.

Where it runs

Clarification and polishing of beverages, flavours and cosmetics

Where the catalogue puts it

Wine and beer clarification and polishing; particle removal in fruit juice and tea; juice concentrate pre-filtration; spirits, flavour and fragrance and cosmetics; pre-filtration ahead of membrane filtration or final sterilization.

Housing

Clary-T LF stainless steel housings take 12" and 16" modules, one to four high.

“Prefiltration before final membrane filtration.”
Lenticular depth filter catalogue, p2
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Lenticular depth filters, as PDF.

  • Lenticular depth filters1.1 MB · Jul 2026
    Download

Open the full library

Related products and tools

  • Above 80 °C

    Fluidizing filters is rated to 600 °C.

    View Fluidizing filters
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker
  • Housings

    Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.

    View housings and systems

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Lenticular depth filters catalogue and the rest of the depth modules range, as PDF.

    Go to downloads

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.