Skip to content

Housings and systems

Plastofilt BFis a polypropylene housing for one 4" diameter filter bag. Up to 10 m³/hr in the 20" Jumbo.

A virgin polypropylene housing for one 4" × 10" or 4" × 20" flat collar bag, with a 1.5" BSP (F) threaded connection. It is rated to 8 bar from 4 °C to 70 °C and uses the same Jumbo body as Plastofilt CF.

Plastofilt BF, catalogue image

Up to 10 m³/hr

Plastofilt BF 10" or 20" Jumbo

Plastofilt BFRequest a quote
Flow, 20" Jumbo
Up to 10 m³/hr
Flow, 10" Jumbo
Up to 5 m³/hr
Maximum operating pressure
8 bar at 21 °C
Temperature
4 to 70 °C
  • Bag and cartridge on one platform

    The Plastofilt Jumbo body is made in cartridge and bag versions.

  • Leak tested before delivery

    Each housing goes through a series of inspections and a pressure leak test before it is delivered.

  • Seal chosen for the fluid

    Silicone, FKM, Buna-N or EPDM.

  • Two lengths

    10" Jumbo up to 5 m³/hr, 20" Jumbo up to 10 m³/hr.

How it is built

Construction

  1. Flat collar bag

    One 4" diameter flat collar bag, 10" or 20" long, sits in the Jumbo body.

  2. Moulded body

    Polypropylene sump and top, with an air release vent.

  3. Threaded ports

    1.5" BSP (F) inlet and outlet.

Plastofilt BF, catalogue image
BodyPolypropylene
Connection1.5" BSP (F)
SealSilicone, FKM, Buna-N, EPDM

Specifications

Specification table

MaterialsBody, vent, seals

PropertyValue
Housing sump and topPolypropylene
VentPolypropylene with stainless steel spring and screw
O-ring / gasketSilicone, FKM, Buna-N, EPDM

Operating limitsFlow, pressure, temperature

PropertyValue
Flow, 10" JumboUp to 5 m³/hr
Flow, 20" JumboUp to 10 m³/hr
Maximum operating pressure0.8 MPa (8.0 bar) at 21 °C
Temperature4 °C to 70 °C

SizesBag, dimensions A, B, C in mm

PropertyValue
10" Jumbo4" × 10" bag; A 415, B 310, C 180
20" Jumbo4" × 20" bag; A 720, B 574, C 180
Box pack6 per box 10" Jumbo; 4 per box 20" Jumbo

Ordering codeBuild the part number field by field

PropertyValue
PatternPPBF- + size + diameter + bag type + connection + body material + seal
Size10 = 10"; 20 = 20"
DiameterJ = Jumbo
Bag typeF = flat collar
Connection15 = 1.5"
Body materialP = polypropylene
SealB = Buna-N; E = EPDM; S = silicone; V = FKM

Source: Plastofilt CF and BF catalogue, 2026, p4, p5 and p6. Dimensions in mm, ± 2 mm.

Where it runs

Water treatment, process water and chemical liquids

Applications in the catalogue

Water treatment, process water, and chemical and industrial liquid filtration.

Bags to fit

Claryfil 4" × 10" and 4" × 20" bags, ordering size codes 5 and 6. Put Plastofilt BF ahead of a Plastofilt CF to take the bulk solids before the cartridge.

“Each housing goes through a series of inspections and a pressure leak test before delivery.”
Plastofilt CF and BF catalogue, 2026, p2
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Plastofilt BF, as PDF.

  • Plastofilt CF and BF1.2 MB · Jun 2026
    Download

Open the full library

Related products and tools

  • Above 70 °C

    Clary-T Vent is rated to 135 °C.

    View Clary-T Vent
  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Plastofilt BF catalogue and the rest of the housings and systems range, as PDF.

    Go to downloads
  • Compare the housings and systems range

    Clary-T CF, Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T BF, Clary-T LF, ClarySEA FRP housing, Polyfilt CF, Polyfilt BF, Polyfilt HF, Plastofilt CF, Catalyst recovery systems

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.