Skip to content

Syringe and Lab Filters

Uni.Q 50 PTFE Vent filter, 50 mmis a 50 mm PTFE membrane vent filter for carboys, small vessels and single-use assemblies. Two pressure grades, 3.0 and 6.0 bar.

A laminated PTFE membrane sealed in virgin gamma stable polypropylene with no added components, for high air flow applications and sterile venting of carboys and small vessels. It is used in single-use assemblies and in pharma processes. The stepped hose barb takes ¼ to ½ in tubing; the filter is integrity testable by bubble point, with 100% lot traceability. The membrane is hydrophobic, which is why the filter works as a vent. It is sterilizing grade, with USP Class VI plastics and REACH, RoHS and ICH Q3D statements. Two grades, SP and HP, have different housings and different maximum operating pressures.

Principle diagram: as a carboy empties, air is drawn in through the PTFE membrane; as it fills, displaced air leaves through it

0.2 and 0.45 µm

Uni.Q 50 PTFE 50 mm, ~20 cm² effective area

Uni.Q 50 PTFERequest a quote
Pore sizes
0.2 and 0.45 µm
Effective filtration area
~20 cm²
Maximum operating pressure
SP 3.0 bar, HP 6.0 bar
End connection
¼ to ½ in stepped hose barb
  • Fits the tubing you use

    The stepped hose barb adapts to tubing from ¼ to ½ in (6.25 to 12.5 mm).

  • For cGMP work

    Can be used in conformance with cGMP practices.

  • Integrity testable

    By bubble point. Integrity test data is part of the standard test certificate.

  • Traceable

    100% lot traceability.

How it is built

Construction

  1. Laminated PTFE membrane

    Hydrophobic, so it passes air and is not wetted by water, which is why it works as a vent. Sets the pore size, 0.2 or 0.45 µm, across about 20 cm² of effective area.

  2. Polypropylene housing

    Virgin gamma stable polypropylene with no added components. The SP and HP grades have different housings.

  3. Stepped hose barb

    One barb takes tubing from ¼ to ½ in, so the filter fits the vessel or assembly as it is.

MembraneLaminated PTFE
HousingPolypropylene
ConnectionStepped hose barb

Specifications

Specification table

ConstructionMembrane and housing

PropertyValue
MediaLaminated PTFE membrane, hydrophobic
HousingVirgin gamma stable polypropylene with no added components

FiltrationPore size, grade, area, sterilisation

PropertyValue
Pore size0.2 µm and 0.45 µm
GradeSterilizing grade
Filtration area~20 cm² effective
SterilisationAutoclavable

Connection and pressureHose barb, two housings, two pressure grades

PropertyValue
End connection¼ to ½ in (6.25 to 12.5 mm) stepped hose barb
HousingsTwo grades with different housings: the SP and HP grades differ in pressure capacity
Maximum operating pressure, SP (standard pressure) grade3.0 bar
Maximum operating pressure, HP (high pressure) grade6.0 bar

Data on requestAsk for the figures for your grade

PropertyValue
Bubble pointIntegrity test data available
Air flow rateFlow rate data available
Burst pressureBurst pressure rating available

Compliance and documentsAs listed on the data sheet

PropertyValue
PlasticsUSP Class VI plastics
StatementsREACH and RoHS statement; ICH Q3D; residual solvent statement
Standard test certificateIntegrity test data, pressure rating, flow rate data and burst pressure rating
QualityQuality compliance certificates

Source: Gopani Uni.Q 50 PTFE vent filter data sheet, 19 Nov 2026, one page: 01 Specification table, 02 Features, 03 Compliance and documents.

Where it runs

Sterile venting of carboys, small vessels and single-use assemblies

Where the data sheet puts it

High air flow applications and sterile venting of carboys and small vessels.

Where Gopani places it

Single-use assemblies and pharma applications: the vent on a carboy, bottle or bag set, where a 50 mm filter on a hose barb does the job a capsule or a housed filter cartridge would do on a larger vessel.

Larger vents

For tanks and fermentors, Clarypleat PTFE capsules and Clarypleat PTFE filter cartridges in Clary-T Vent housings carry the same duty at a larger scale.

“For high air flow applications and sterile venting of carboys and small vessels.”
Uni.Q 50 PTFE vent filter data sheet, 2026
Vent filtration, the application

Resources for this line

Ask an application engineer for the datasheet.

Contact an application engineer

Related products and tools

Request a quote

Send the vessel or assembly, the pore size and pressure grade you need, the tubing size and the quantity. An application engineer replies with the matching Uni.Q 50 filter and the data for your grade.

Request a quote
  • Request the catalogues

    Catalogues for the syringe and lab filters range, sent by email on request.

    Go to the catalogues
  • Compare the syringe and lab filters range

    Uni.Q syringe filters, Uni.Q 50 PES, HPLC solvent inlet filters

    Open the family

Request a catalogue

Tell us who you are and where to send it. Our team emails the catalogue to you.

By sending this you agree to our Privacy notice.