High flow
RO Protect HFtakes up to 1900 LPM of water through one 60" element. 6" diameter, inside-to-outside flow.
A 6 inch (152 mm) pleated cartridge with inside-to-outside flow, so captured solids stay inside the element when it is changed. In 20", 40" and 60" lengths, with pleated polypropylene, depth pleated polypropylene or glass micro-fibre media, on polypropylene or stainless steel hardware.

1, 5, 10, 20, 50 µm
RO Protect HF OD 152 mm (6"), 20", 40", 60"
- Flow per 60" element, water
- Up to 1900 LPM
- Filtration area, 60"
- 9 m²
- Outer diameter
- 152 mm (6")
- Max ΔP / change‑out ΔP
- 3.4 / 2.4 bar
Fewer elements
Up to 1900 LPM through one 60" cartridge, so a system needs fewer elements and a change-out takes less time.
Solids leave with the cartridge
Inside-to-outside flow keeps the captured particles inside the element during change-out, away from the filtrate.
Three media
Pleated polypropylene, depth pleated polypropylene for gels and agglomerates, or pleated glass micro-fibre laminate.
Element and housing
Fits Clary-T HF stainless steel housings and the Polyfilt HF uPVC housing.
How it is built
Inside to outside, through a graded pleat.
- Flow enters the core
Fluid flows from the inside of the cartridge to the outside, so particles are trapped inside the element.
- Gradient pore structure
The pleated media has a gradient pore structure. In HF-DPP, multi-layer depth media with a continuously graded pore structure is formed into the pleat.
- Nothing added
Gopani certifies that no resin binders, lubricants, antistatic or release agents are used in manufacture.

| Media | Pleated PP, depth pleated PP, glass micro-fibre |
|---|---|
| Hardware | Polypropylene or stainless steel |
| Seal | Silicone, EPDM, Viton, Teflon encapsulated Viton |
Specifications
Specification table
MediaOne cartridge, three media
| Property | Value |
|---|---|
| PP | Pleated polypropylene |
| DPP (RO Protect HF-DPP) | Depth pleated polypropylene: multi-layer non-woven PP with a continuously graded pore structure in a pleated geometry, for gels and agglomerates |
| GF | Pleated glass micro-fibre laminate |
MaterialsSupport, hardware, seals
| Property | Value |
|---|---|
| Support layer | Polypropylene non-woven, PP mesh |
| Plastic parts | Polypropylene |
| Hardware | Polypropylene or stainless steel |
| O-ring / gasket | Silicone, EPDM, Viton, Teflon encapsulated Viton |
PerformanceRetention, flow, pressure
| Property | Value |
|---|---|
| Micron ratings | 1, 5, 10, 20, 50 µm |
| Flow per element, water, ideal conditions | 20": 660 LPM; 40": 1300 LPM; 60": 1900 LPM |
| Flow per cartridge, water | Up to 114 m³/h |
| Effective filtration area, nominal | 40": 6 m²; 60": 9 m² |
| Maximum operating temperature | 82 °C |
| Maximum differential pressure | 3.4 bar |
| Recommended change-out ΔP | 2.4 bar |
| Flow direction | Inside to outside |
DimensionsDiameter and lengths
| Property | Value |
|---|---|
| OD | 152 mm (6") |
| Lengths | 20", 40", 60" |
| End connections | Multiple types; ordering codes 13, 35, 36 |
Ordering codeBuild the part number field by field
| Property | Value |
|---|---|
| Pattern | RPHF- followed by micron, length, diameter, end fitting, media, hardware, seal |
| Micron | D = 1 µm, G = 5 µm, H = 10 µm, I = 20 µm |
| Length | 20, 40, 60 (inches) |
| Diameter | S = 6" (152 mm) |
| End fitting | 13, 35, 36 |
| Media | PP = pleated polypropylene; GF = glass fibre; DPP = depth pleated polypropylene |
| Hardware | PP = polypropylene; SS = stainless steel |
| Seal | E = EPDM; S = silicone; V = Viton; W = Teflon encapsulated Viton |
Source: RO Protect High Flow catalogue, 2026, p2 to p4. Flow per length is for water under ideal conditions, from the Clarypleat HE and high flow one pager, p2.
Where it runs
RO and desalination, condensate, and process liquids at high flow.
RO pre-filtration and seawater desalination pretreatment; condensate and hot water recovery in power generation; API, solvents and water in biopharma; bottled water, high fructose, edible oil, soft drinks and milk; paints and coatings, petrochemical, refineries and diesel fuel; raw water and brines for workover and completion.
The Polyfilt HF uPVC housing takes one 6" × 60" cartridge at a typical flow of 40 m³/hr.

“Inside out flow traps the particulates inside the cartridge itself, which prevents them from contaminating the filtrate even during the change.”
Resources for this line
Datasheets and catalogue pages that cover RO Protect HF, as PDF.
Related products and tools
Chemical compatibility
A fluid checked against membrane, media, seal and housing materials at the operating temperature.
Open checkerHousings
Stainless steel, uPVC, FRP and polypropylene housings, bag vessels and skids.
View housings and systems
Request a quote
Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.
Request a quote- Download the catalogues
The RO Protect HF catalogue and the rest of the high flow range, as PDF.
Go to downloads