Skip to content

Housings and systems

Clary-T LFis a stainless steel housing for 12" or 16" lenticular depth modules, up to four high.

Housings for lenticular depth modules used for clarification, decolorisation and fine filtration in chemicals, food and beverage, cosmetics, biotech and selected pharma. Half height to four modules of 300 mm (12") or 400 mm (16"), sealed by double O-ring or flat gasket, supplied ready to use.

Clary-T LF, catalogue image

0.7 MPa, 65 °C

Clary-T LF 12" or 16" modules, 1 to 4

Clary-T LFRequest a quote
Modules
Half height to 4
Module diameter
12" or 16"
Maximum operating pressure
0.7 MPa
Maximum operating temperature
65 °C
  • Ready to use

    Supplied as a ready to use unit; retightening after wetting is not necessary.

  • Closed system

    The enclosed design keeps the product in the housing during filtration and module change.

  • Sterilisable

    Autoclave, steam sterilise, or disinfect with hot water or chemicals.

  • Two module seals

    Double O-ring or flat gasket, to match the module you run.

How it is built

Stacked modules in a clamped stainless steel housing

  1. Stack the modules

    Half height, 1, 2, 3 or 4 modules of 12" or 16".

  2. Seal

    Double O-ring or flat gasket between module and housing.

  3. Close

    Rathmann bolting clamps or a V-band clamp on the detachable dome.

Clary-T LF, catalogue image
Module sealDouble O-ring or flat gasket
ClosureRathmann clamps or V-band
FinishMirror, electropolish optional

Specifications

Specification table

MaterialsHousing, clamp, seals

PropertyValue
HousingSS 304, SS 316, SS 316L, duplex SS 2205, duplex SS 2507
Closure clampSS 304
O-ringSilicone, Viton, EPDM, PTFE; others on request

Operating limitsPressure, temperature, cleaning

PropertyValue
Maximum operating pressure0.7 MPa (7.0 bar, 101.5 psi)
Maximum operating temperature65 °C (149 °F)
SterilisationAutoclave or steam sterilisation, or hot water or chemical disinfection
Inlet and outletASA 150#, DIN, tri-clover, BS-10 Table 'D', 'E', 'F' flange; 2", 2 1/2", 3", 4"
Vent and drainFlanged or tri-clover, 1/2", 1"
Design codeASME Section VIII Division 1, GEP, PED 97/23/EC, CE marking

Ordering codeBuild the part number field by field

PropertyValue
PatternCTLF- + design code + housing type + no. of modules + module OD + material + connection type + size + O-ring
Design codeA = ASME Section VIII Division 1; C = CE mark; G = GEP; P = PED
Housing typeD = flat gasket; B = double O-ring
No. of modules2 digits
Module OD12 = 12"; 16 = 16"
Material04 = SS 304; 4L = SS 304L; 16 = SS 316; 6L = SS 316L; DL = Duplex 2205
Connection typeA = ASA 150# flange; D, E, F = BS-10 Table 'D', 'E', 'F' flange; U = DIN flange; V = V-band (tri-clover)
Connection size02 = 2"; 25 = 2 1/2"; 03 = 3"; 04 = 4"
O-ringB = Buna-N; E = EPDM; S = silicone; V = Viton; T = Teflon encapsulated Viton

Source: Clary-T SS All Filter Housing catalogue, 2026, p17 to p19.

Where it runs

Clarification, decolorisation and fine filtration

Applications in the catalogue

Chemicals, food and beverage, cosmetics, biotechnology and selected pharmaceutical applications.

Modules to fit

Gopani lenticular depth filters in 12" and 16".

“Supplied as a ready to use unit; subsequent retightening after wetting is not necessary.”
Clary-T SS All Filter Housing catalogue, 2026
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Clary-T LF, as PDF.

  • Clary-T SS filter housings2.1 MB · Sep 2026
    Download

Open the full library

Related products and tools

  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clary-T LF catalogue and the rest of the housings and systems range, as PDF.

    Go to downloads
  • Compare the housings and systems range

    Clary-T CF, Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T HF, Clary-T Vent, Clary-T BF, ClarySEA FRP housing, Polyfilt CF, Polyfilt BF, Polyfilt HF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.