Skip to content

Housings and systems

Clary-T HFis a stainless steel housing for 6 inch high flow cartridges, horizontal or vertical. Connections 4" to 20".

Stainless steel housings for high flow cartridges: SOE elements of 152.4 mm (6") diameter in 20", 40" and 60" lengths. A shell, cartridge holding plate, cartridge cage and positive sealing arrangement keep unfiltered and filtered liquid apart, in horizontal and vertical types.

Clary-T HF, catalogue image

0.7 MPa, 4" to 20"

Clary-T HF 6" SOE, 20", 40", 60"

Clary-T HFRequest a quote
Cartridge
6" SOE, 20" to 60"
Maximum operating pressure
0.7 MPa, others on request
Maximum operating temperature
65 °C
Connections
4" to 20"
  • Built for high flow elements

    Holding plate, cage and positive sealing arrangement sized for 6" SOE cartridges.

  • Horizontal or vertical

    Horizontal models give easy cartridge access; vertical models take less floor space.

  • Fewer cartridges

    High flow cartridges reduce the number of elements to change, which shortens change-out.

  • Design codes

    ASME Section VIII Division 1, PED 97/23/EC and CE marking, or GEP.

How it is built

Shell, holding plate, cage and positive seal

  1. Holding plate

    SOE high flow cartridges seat in the cartridge holding plate.

  2. Cage

    A cartridge cage supports the elements inside the shell.

  3. Positive seal

    A positive sealing arrangement keeps unfiltered liquid off the outlet side.

Clary-T HF, catalogue image
CartridgesSOE, 152.4 mm (6")
OrientationHorizontal or vertical
Vent and drain1", NPT, BSP, tri-clover or flanged

Specifications

Specification table

MaterialsHousing, clamp, seals

PropertyValue
HousingSS 304, SS 316, SS 316L, duplex SS 2205, duplex SS 2507
Closure clampSS 304
O-ringSilicone, Viton, EPDM, PTFE; others on request

Operating limitsPressure, temperature, connections

PropertyValue
Maximum operating pressure0.7 MPa (7.0 bar, 101.5 psi); others on request
Maximum operating temperature65 °C (149 °F)
Inlet and outletASA 150# flange, NPT, BSP, DIN flange, BS-10 Table 'D', 'E', 'F' flange, tri-clover; 4" to 20"
Design codeASME Section VIII Division 1, GEP, PED 97/23/EC, CE marking
Internal finishMatt, mirror, glass bead blasted

Ordering codeBuild the part number field by field

PropertyValue
PatternCTHF- + design code + no. of cartridges + material + housing type + connection type + size + O-ring
Design codeA = ASME Section VIII Division 1; C = CE mark; G = GEP; P = PED
No. of cartridges3 digits
Material04 = SS 304; 4L = SS 304L; 16 = SS 316; 6L = SS 316L; DL = Duplex 2205
Housing typeH = horizontal; V = vertical
Connection typeA = ASA 150# flange; D, E, F = BS-10 Table 'D', 'E', 'F' flange; U = DIN flange
Connection size04, 05, 06, 08, 10, 12, 14, 16, 18, 20 (inches)
O-ringB = Buna-N; E = EPDM; S = silicone; V = Viton; T = Teflon encapsulated Viton

Source: Clary-T SS All Filter Housing catalogue, 2026, p7 to p9.

Where it runs

High flow stages in RO, desalination and process water

Cartridges to fit

RO Protect HF elements are 6" (152 mm) in 20", 40" and 60" lengths. Send us your flow and we size the vessel and confirm the fit.

Non-metallic option

For one 60" element in corrosive water, Polyfilt HF is the uPVC alternative.

“Engineered for use with high-flow filter cartridges.”
Clary-T SS All Filter Housing catalogue, 2026, p7
See the catalogues

Resources for this line

Datasheets and catalogue pages that cover Clary-T HF, as PDF.

  • Clary-T SS filter housings2.1 MB · Sep 2026
    Download

Open the full library

Related products and tools

  • Chemical compatibility

    A fluid checked against membrane, media, seal and housing materials at the operating temperature.

    Open checker

Request a quote

Send the part number you use today, the micron rating, flow and fluid. An application engineer replies with the matching Gopani cartridge.

Request a quote
  • Download the catalogues

    The Clary-T HF catalogue and the rest of the housings and systems range, as PDF.

    Go to downloads
  • Compare the housings and systems range

    Clary-T CF, Clary-T SF sanitary housing, Clary-T SF strainer, Clary-T Vent, Clary-T BF, Clary-T LF, ClarySEA FRP housing, Polyfilt CF, Polyfilt BF, Polyfilt HF, Plastofilt CF, Plastofilt BF, Catalyst recovery systems

    Open the family

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.