What is a sediment filter?
A sediment filter is a filter cartridge, or a bag, that holds back solid particles carried in a liquid. "Sediment" covers anything that would settle out if the liquid stood still: sand, silt, clay, rust flakes, pipe scale and fibres. The cartridge sits in a housing in the line, and the liquid passes through its wall from outside to core.
What a sediment filter removes, and what it does not
- Removes. Suspended particles above its rating: sand, silt, rust, scale, fibres and other debris. This is turbidity you could, in principle, see.
- Does not remove. Dissolved salts and hardness, dissolved chemicals, chlorine, taste and odour. Those need other treatment, such as activated carbon, ion exchange or reverse osmosis.
A sediment filter is also not, by itself, a barrier to bacteria. Microbial control needs a validated sterilizing-grade membrane or another treatment step.
What sediment filters are used for
- Protecting RO and other membranes from particles that foul and scratch them
- Protecting activated carbon beds and filter cartridges from being clogged by silt
- Ahead of UV units, so particles do not shade the water from the lamp
- Protecting spray nozzles, dosing pumps, valves and heat exchangers
- Clarifying process water, utility water and borewell water
- Pre-filtration ahead of finer filter cartridges, so the final filter lasts
Types of sediment filter cartridge
- Melt blown. Polypropylene fibres in a graded tube. The common, economical choice for water and RO feed.
- String wound. Yarn wound on a core. Takes heavy and variable sediment, viscous liquids and, in glass fibre, heat.
- Pleated. Folded media with a large area. For finer and absolute ratings, often as the last sediment stage.
- Filter bags. Felt or mesh bags for very heavy loads and coarse ratings, often ahead of filter cartridges.
- What is a melt blown (PP spun) cartridge filter?Guide, melt blown filter cartridges
- What is a string wound cartridge filter?Guide, string wound filter cartridges
- What is a pleated cartridge filter?Guide, pleated filter cartridges
- Industrial liquid filter bagsGuide, filter bags
Which micron sediment filter do you need?
Start from what the equipment downstream needs, not from the smallest number. A rating finer than the job needs loads quickly and raises the pressure drop; a coarser one lets through what it was meant to stop.
Where the sediment covers a wide range of sizes, filter in stages, coarse to fine: for example a coarser filter cartridge or bag first, then a finer cartridge. Each stage takes part of the load, and the finest stage lasts longer than it would alone. For RO feed, use the rating the membrane supplier specifies for the final pre-filter.
Check whether a rating is nominal or absolute: two filter cartridges marked "5 micron" can retain very different fractions of 5 µm particles.
How many microns a water filter should be is covered in more detail on the blog. Read the post
When to change a sediment filter cartridge
Fit pressure gauges before and after the housing. Change the filter cartridge when the difference between them reaches the change-out value for the cartridge, or when flow falls below what the process needs. On water with a steady load the interval settles; log it, and adjust the staging if one stage is changed far more often than the others.
Gopani lines by duty
Start from the duty, not the product name. Each line links to its page; the figures are its own, from its catalogue.
- Water and RO pre-filtration
- RO Protect Eco
- Rating 1 to 25 µm
- Max temp 80 °C
- Change-out 1.4 bar
- Heavy or variable sediment
- Clarywound Extreme
- Rating 0.5 to 150 µm
- Change-out 2.5 bar
- Lengths 9.75" to 70"
- A finer final sediment stage in polypropylene
- Clarypleat HE
- Rating 0.22 to 50 µm
- Max temp 80 °C
- Change-out 2.4 bar
- Large water flows through few elements
- RO Protect HF
- Flow, 60" Up to 1900 LPM
- Area, 60" 9 m²
- Change-out 2.4 bar
- Coarse sediment, bag cleaned and reused
- Claryfil nylon monofilament bags
- Rating 50 to 300 microns
- Flow, Size 2 34 m³/hr
- Max temp 80 or 130 °C
Change-out pressure is a recommendation; confirm against your fluid and temperature.
Temperatures are maxima for the stated media and core.
Flow per length is for water under ideal conditions.
Replacing a cartridge you already use?
Gopani makes replacement cartridges to a part number, a sample or a drawing. Give the make and the part number you run today, or what the end cap or nameplate shows, with the micron rating and the fluid. An application engineer will reply with the cartridge we would supply for your housing and duty, or ask for what is missing.
Replacement filter cartridges, every familyHigh flow replacement finder
Send the make and part number
Frequently asked questions
What is a sediment filter?
A filter that removes suspended solids, such as sand, silt, rust and scale, from water or another liquid. It works mechanically, by particle size, and is usually a filter cartridge or a bag in a housing.
What are sediment filters used for?
To protect membranes, carbon, UV units, nozzles and process equipment from particles, and to clarify process, utility and borewell water. They are the first stage in most water treatment trains.
What micron sediment filter do I need?
The rating the equipment downstream needs, reached in stages where the sediment is heavy or mixed. For RO feed, the membrane supplier specifies the final pre-filter rating.
Is a sediment filter the same as a carbon filter?
No. A sediment filter removes particles. An activated carbon filter adsorbs dissolved organics, chlorine, taste and odour. Sediment filters usually go first, so silt does not clog the carbon.
What types of sediment filter cartridge are there?
Melt blown, string wound and pleated filter cartridges, and filter bags for heavy, coarse loads.
Ask an application engineer
Describe your fluid and duty
Sizing a sediment stage for your water? Describe the fluid and the duty. An application engineer will answer by email.
Catalogues
Request a catalogue
Each catalogue holds the full specification, dimensions and ordering codes. Catalogues are sent by email on request.
- RO Protect Eco Catalogue, revised Sep 2026Request catalogue
- Clarywound Extreme Catalogue, revised Apr 2026Request catalogue
- Clarypleat HE CatalogueRequest catalogue
- RO Protect High Flow Catalogue, revised Aug 2026Request catalogue
- Bag filters Catalogue, revised Mar 2026Request catalogue
Related guides
- What is a cartridge filter?Guide, cartridge filters
- String wound vs pleated filter cartridgesGuide, choosing a filter cartridge
- What is a melt blown (PP spun) cartridge filter?Guide, melt blown filter cartridges
- Industrial liquid filter bagsGuide, filter bags
- Premature membrane blindingField problem, final filters loading early