Skip to content

What is a melt blown (PP spun) cartridge filter?

A melt blown cartridge is a polypropylene depth filter formed from fine fibres, also called a spun or spun bonded cartridge. This guide covers how it is made, how it works and where it is used.

Last updated 17 Nov 20264 min read

What is a melt blown filter cartridge?

Melt blown cartridges are cylindrical filters made from very fine polymer fibres. The fibres are blown and collected on a rotating spindle, then pressed and sintered, forming a density gradient that is denser at the core and looser at the outside. Polypropylene is the most common material. The same product is also called a spun cartridge filter or a spun bonded cartridge filter.

How is a melt blown cartridge filter made?

Molten polymer is forced through a tubular path and blown out, and the air draws it into fibres. The fibres collect on a rotating spindle in a controlled environment, forming a graded structure that is then pressed and sintered. Finer fibres capture very small sediment from liquids.

How does a spun bonded cartridge filter work?

Filtration runs out to in. Liquid enters from the outside, passes through the media into the hollow centre and leaves through the outlet.

Characteristics of a melt blown cartridge filter

Melt blown cartridges are sturdy and have a fixed pore structure. They are used for water filtration, pre-filtration for reverse osmosis, oils, mildly corrosive liquids, compatible solvents and gases. The Gopani RO Protect lines are rated to a maximum of 60 °C or 80 °C, depending on the line.

Features to look for in a polypropylene melt blown filter:

  • Good dirt holding capacity
  • Materials that meet FDA requirements
  • Low pressure drop in operation
  • Resistance to mildly corrosive liquids and chemicals
  • A graded density pore structure
  • A fixed pore structure

SOE and DOE types

  • SOE (single open ended). One end is sealed with a polypropylene cap.
  • DOE (double open ended). Both ends are open, with no end caps.

Applications

  • Water and wastewater filtration
  • Pre-filtration for reverse osmosis
  • Pre-filtration in desalination
  • Pre-filtration for industrial water treatment systems
  • Metal plating
  • Photographic fluids
  • Chemical filtration
  • Textile printing inks and specialty coatings
  • Highly viscous liquids
  • Weak acids and bases, chemicals and solvents

How the structure extends service life

The gradient captures larger particles at the surface and finer ones near the core, which reduces clogging. Because the pore structure is fixed, the pores keep their shape and the filtration efficiency holds through the service life.

What is a multicomponent melt blown cartridge filter?

A multicomponent cartridge has a layered structure of non-woven and moulded layers. The layers allow fine filtration and longer equipment life.

Why are some cartridges grooved?

Grooves increase the surface area, which raises dirt holding capacity. A grooved surface is an option on some Gopani melt blown lines.

Why use a pre-washed melt blown cartridge?

Pre-washing removes contaminants, surfactants and foaming agent residues from the cartridge, which helps prevent chemical leaching and foaming.

Melt blown cartridges at Gopani

Each RO Protect line has its own page with ratings, temperatures, lengths and ordering codes. See melt blown cartridges

Request a quote

Frequently asked questions

What is a melt blown cartridge filter?

A depth filter made by extruding molten polypropylene into fine fibres that are blown onto a rotating spindle, forming a tube of graded density. Particles are trapped through the wall, which gives high dirt holding capacity at low cost.

What is the difference between melt blown and PP spun cartridges?

The terms usually describe the same family of polypropylene depth cartridges. Melt blown refers to how the fibres are formed and PP spun to the resulting media. Both have a graded pore structure, coarser outside and finer toward the centre.

Is a melt blown filter a depth or surface filter?

A depth filter. It captures particles through its thickness, which suits high-load pre-filtration where dirt holding capacity matters more than an absolute micron rating.

What sizes are available?

Standard lengths run from 10 to 40 inches, with jumbo, large-diameter formats for higher flow. Micron ratings vary by line; each line page lists its own.

When should I use a melt blown cartridge instead of a pleated or string wound filter?

Choose melt blown for economical depth pre-filtration with high capacity. Choose pleated for an absolute rating and longer life, or string wound for higher temperatures and heavy sediment loads.

Send us what you run today.

The fluid, the flow, the temperature and the cartridge or bag you use now. An application engineer will reply.

Request a quote

Download a catalogue

Tell us who you are once and every catalogue opens.

By sending this you agree to our Privacy notice.