Complete guide to industrial liquid filter bags
Filter bags protect downstream equipment from particles. This guide covers how they work, the media types, micron ratings, sizing and selection.
What is an industrial liquid filter bag?
A filter bag is a porous sleeve held in a sealed housing. It traps particles in its depth or at its surface. A bag is replaced when it is full, or cleaned if it is mesh. A single Size 2 bag (7" × 32") handles flows up to 34 m³/hr.
How a bag filter system works
A bag filter has three main parts: the housing, the bag, and a collar or ring that seals the bag to the housing basket. Liquid passes through the bag and leaves cleaner.
Differential pressure across the housing rises as particles collect in the bag. Replace the bag when it reaches the maximum recommended for the bag and housing.
Housings with 2, 4, 8 or more bags in parallel increase throughput while keeping bag changes manageable. Single-bag housings suit lower flows, or duties where frequent changes are acceptable.
Filter bag media types: felt and mesh
Needle-punched felt filters through its depth. Woven monofilament mesh filters at its surface.
Felt filter bags: depth filtration
Felt bags are made of randomly arranged, needle-punched polypropylene or polyester fibres. They trap particles through the thickness of the media, which suits heavy solids loads. Claryfil felt bags are rated from 1 to 200 µm and are used once.
- Claryfil PP. Polypropylene felt, chemically resistant, to 80 °C. Used in water treatment and chemical processing.
- Claryfil PE. Polyester felt, to 130 °C on a steel ring. Suited to inks, paints, resins and hot oils.
Mesh filter bags: surface filtration
Mesh bags are woven from single-strand nylon and catch particles at their surface. Claryfil mesh bags are rated from 50 to 300 microns. Mesh can be backflushed, rinsed or cleaned ultrasonically and reused, which lowers the cost per cycle for coarse contaminants.
- Claryfil NMO. Nylon monofilament mesh, to 80 °C on a polypropylene collar or 130 °C on a steel ring.
Understanding micron ratings
A micron is one thousandth of a millimetre. An absolute rating means 99% or more of particles at the rated size are captured. A nominal rating means roughly 50% to 70% are captured.
A rating that is too fine raises the pressure drop and shortens bag life. A rating that is too coarse lets contaminants through.
Standard filter bag sizes
Four standard sizes fit housings from the major global suppliers. Dimensions are diameter × length.
- Size 1. 7" × 16", up to 18 m³/hr.
- Size 2. 7" × 32", up to 34 m³/hr.
- Size 3. 4" × 8", up to 6 m³/hr.
- Size 4. 4" × 14", up to 12 m³/hr.
Multi-bag housings scale throughput. Other sizes, including 5, 6, 2X and 7, are available on request.
How to select industrial liquid filter bags: a five-step checklist
- Identify the fluid and temperature. Polypropylene to 80 °C; polyester and nylon mesh to 130 °C on a steel ring.
- Set the target micron rating. If no test data exists, start with a 25 µm felt bag.
- Choose the media. Felt for high solids loads, used once; mesh for coarse contaminants, cleaned and reused.
- Match the bag size to the housing. Size 1 to Size 4.
- Choose the collar. Polypropylene to 80 °C, or a steel ring to 130 °C. Confirm food-contact compliance where it is needed.
Industry applications
- Chemicals and petrochemicals. Removing catalyst fragments, clarifying solvents and treating process water. Polypropylene and polyester bags are the usual choices.
- Food and beverage. Clarifying edible oils, beverages, sugar syrup and brine. Mesh bags are common because they can be cleaned and reused.
- Ink, paint and coatings. Removing pigment clumps and gel bodies before packaging. Polyester bags cope with the solvents and heat in this sector.
- Oil and gas, and water treatment. Treating produced water, cooling tower water, RO feed and wellhead water. Polypropylene and polyester bags capture suspended solids.
- Desalination. Pre-filtering seawater or brackish water before it reaches RO membranes, often with polypropylene bags of 5 to 25 µm.
- Pharmaceuticals and biotech. Filtering process water, buffer solutions and API streams.
When should you replace a filter bag?
Replace a bag when the differential pressure rises to its recommended maximum, when flow drops, when inspection shows damage, or at a scheduled interval. Felt bags are used once. Mesh bags can be backflushed or cleaned ultrasonically, then inspected before reuse.
Claryfil filter bags by Gopani: made in India since 1993
Gopani has made filters in Ahmedabad since 1993. It is ISO 9001 certified and its products are used in more than 30 countries. Claryfil bags are made in polypropylene and polyester felt and nylon mesh, in the standard sizes and in custom sizes on request.
Each Claryfil line has its own page with ratings, sizes, temperatures and ordering codes. See filter bags
- Claryfil felt filter bagsPolypropylene and polyester felt, 1 to 200 µm
- Claryfil nylon monofilament bagsNylon monofilament mesh, 50 to 300 microns