What is a string wound cartridge filter?
A string wound filter cartridge is a depth filter made by winding twisted microfibre yarn around a core in a honeycomb pattern, which builds a gradient structure. Its performance depends on the yarn, the core material and a controlled winding process that sets the micron rating.
Larger particles are caught near the surface and finer ones deeper in the wall, so the design suits high dirt loads.
How does a string wound cartridge filter work?
The winding is denser near the core and looser on the outside. Large sediment is caught first and finer particles are removed layer by layer, which extends dirt holding capacity and service life. The cartridge copes with varying sediment loads, resists clogging and needs replacing less often.
Where are string wound filter cartridges used?
- Food and beverage. Removing unwanted particles in production.
- Pharmaceuticals. Filtration to meet strict standards.
- Water treatment. Removing sediment, silt and other contaminants.
- Mining. Filtering suspended solids.
- Chemical processing. Handling corrosive chemicals and solvents.
- Oil and gas. Removing impurities from crude and refined products.
- Gas and air filtration. Capturing contaminants in industrial air systems.
- Flue gas treatment. Reducing particulate emissions.
- Desalination. Pre-filtering seawater.
- Automotive. Fluid filtration systems.
Fluids they suit include water, alkalis, dilute acids, organic acids and solvents, potable liquids, petroleum oils and mineral acids.
What are the advantages of a string wound cartridge filter?
String wound filters are chosen for dirt holding capacity, strength under differential pressure and service life. Many housings seat the cartridge on a knife edge, which helps prevent bypass.
- Dirt holding capacity. The gradient density holds more dirt, so cartridges are replaced less often.
- Durability. The cartridge keeps its structure under high pressure.
- Knife edge sealing. Seating on a knife edge helps avoid bypass.
- Service life. A longer life lowers cost over time.
What happens with a poorly sealed cartridge filter housing?
Some housings have no internal sealing. Liquid can then seep past the filter, gaskets can degrade, and the cartridge can shift and leave gaps for contaminants. A filter that lets contaminants through is not doing its job.
Consequences of a poorly sealed housing
- Seepage. Contaminants bypass the media.
- Gasket degradation. Leaks and lower efficiency.
- Displacement. The cartridge shifts and performance drops.
- Frequent failures. More replacements and higher operating cost.
A housing with reliable sealing keeps filtration consistent.
How to select a string wound cartridge filter
Four components matter: the core, the yarn, the end cap and the gasket. Choose materials compatible with the fluid, a strong core, suitable yarn and controlled winding.
Features to look for:
- Construction free of processing chemicals
- Graded density winding
- A precise micron rating
- Minimal media migration
- High dirt holding capacity
- Long service life
- Structural stability
Additional guidance on selection
- Winding pattern. Looser outer layers catch large particles and tighter inner layers catch fine ones, which adds capacity and life.
- Yarn compatibility. Polypropylene for general and chemical use, glass fibre for high temperatures, and cotton for potable or food-grade duty.
- Core material. Stainless steel for high pressure or temperature, polypropylene for standard and corrosive conditions.
- Manufacturing. Consistent tension, controlled micron rating and good bonding reduce tunnelling and media migration.
What types of core are used in a string wound cartridge?
Polypropylene, glass filled polypropylene, stainless steel and tinned steel.
What yarns are used in a string wound cartridge filter?
Natural cotton, bleached cotton, glass fibre, polypropylene, nylon, rayon, polyester and others.
Common issues with poor-quality string wound filters
- Tunnelling. Smooth, loosely wound or badly tensioned yarn shifts and rolls, opening gaps that let particles bypass the filter and making the micron rating hard to hold. Correct tension, controlled winding and textured yarn prevent it.
- Chemical leaching. Binders, lubricants, antistatic agents and release agents used in processing leach into the filtrate, which matters most in pharma, food and potable water. Choose yarn free of these agents, or prewash the cartridge and let liquid run through it before use. Inert materials, or materials that meet FDA requirements, avoid the problem.
- Media migration. Loose or short fibres shed into the filtrate. Poor yarn, weak bonding, rough handling, poor packaging, worn seals and uneven flow make it worse. Continuous filament yarn and sound production practice prevent it.
- Prevention. Strict quality control, defined standards and materials suited to the application.
What is a micron rating?
A micron rating describes the size of particle a filter removes. A 10 micron filter captures contaminants down to 10 microns. For scale:
- 50 microns. About the width of a human hair.
- 40 microns. Too small to see with the naked eye.
- 25 microns. About the size of a white blood cell.
- 8 microns. About the size of a red blood cell.
- 2 microns. About the size of bacteria.
A nominal rating means the filter captures 50% to 90% of particles at the stated size. For example, a 50% rating at 25 microns captures half of the 25 micron particles. An absolute rating means the filter removes 98.7% or more of particles at the stated size.
Ratings are stated on different bases by different suppliers. How to read a retention rating
String wound cartridges at Gopani
Each Clarywound line has its own page with media, cores, ratings, lengths and ordering codes. See string wound cartridges
- Clarywound UltraPolypropylene
- Clarywound ExtremePolypropylene, cotton or glass fibre
- Clarywound 3XPolypropylene, multilayer gradient
- Clarywound GFGlass fibre
- Clarywound CPUCondensate polishing
- Clarywound Extreme BicoBi-component media
Frequently asked questions
What is a string wound cartridge filter?
A depth filter made by winding yarn, such as polypropylene, cotton or polyester, around a central core in a diamond pattern. The layers trap particles through their depth, so the cartridge holds a lot of dirt in sediment-heavy water and process streams.
Is a string wound filter a depth or a surface filter?
A depth filter. Particles are captured through the full thickness of the yarn, not only at the surface, which suits pre-filtration of streams with heavy sediment.
What materials are available?
Common yarns are polypropylene, cotton, polyester and glass fibre. The material is chosen for chemical compatibility and operating temperature. Micron ratings vary by line; each line page lists its own.
What are string wound filters used for?
Pre-filtering water, chemicals, oils, paints, plating solutions and other process fluids, especially where suspended solids are heavy and an economical cartridge with high capacity is needed.
How does a string wound cartridge compare with melt blown and pleated filters?
String wound and melt blown cartridges are both depth filters. String wound generally handles higher temperatures and heavy sediment, while melt blown has a more evenly graded structure. Pleated cartridges are surface filters chosen for absolute ratings and longer life.