Skip to content

Filtration Academy

Filtration Academy. Filtration principles, selection and validation.

Articles on how filtration works, from micron ratings to validation, each worked through with figures for Gopani products. Read them in order or one at a time.

Start here

Five short articles that cover the basics used throughout the Filtration Academy.

  1. Basics

    What a micron rating promises

    The number on the label, the test behind it and the efficiency it implies.

    Read
  2. Basics

    Nominal and absolute

    Why the same rating can retain very different amounts.

    Read
  3. Basics

    Depth and surface filtration

    Where particles are held, and what that does to life and cost.

    Read
  4. Basics

    Reading a differential pressure curve

    What the slope says about the fluid, the pre-filter and the change-out day.

    Read
  5. Selection

    How to size a pre-filter

    Size on the solids it will hold, so the stage after it does not blind.

    Read

Curriculum

A reading path from the basics to selection to validation. Each step assumes the one before it.

Start at step one

BasicsHow filtration works

  1. What a micron rating promises. The number, the test behind it and the efficiency it implies.

  2. Nominal and absolute. Why the same rating can retain very different amounts.

  3. Depth and surface filtration. Where particles are held, and what that does to life and cost.

  4. Reading a differential pressure curve. What the slope says before the filter cartridge reaches its limit.

SelectionChoosing the stage

  1. How to size a pre-filter. Dirt load first, micron rating second.

  2. Choosing a membrane. PES, PVDF, PTFE or nylon, by fluid, temperature and sterility.

  3. Sizing a train stage by stage. From bag to final filter cartridge, so no stage carries the load of another.

  4. Choosing a housing. Flow, pressure, material and the seal that holds the rating.

ValidationProving it works

  1. Integrity testing. Bubble point, diffusion and what a failed test is telling you.

  2. Compatibility before the first batch. Testing the fluid against media, seals and housing.

  3. Change-out records. What to keep from every change-out and test, so an audit reads the line.

Ask an application engineer

For a question not covered here, send the line, the fluid and the duty. We will reply.

Ask an application engineer
  • Request the catalogues

    Catalogues for every family, sent by email on request.

    Request catalogues
  • Work the numbers

    A cost of ownership calculator, a unit converter and a flow and pressure drop estimator.

    Engineering tools

Request a catalogue

Tell us who you are and where to send it. Our team emails the catalogue to you.

By sending this you agree to our Privacy notice.