Skip to content

Flow and pressure drop estimator.

Choose a Gopani line, enter the flow and the viscosity, and see the number of elements and the clean pressure drop that its catalogue figures give. It is a first estimate for a clean element, to be confirmed by an application engineer.

Calculated in your browser. Nothing you enter is sent anywhere unless you send it with the form below.

Line and duty

Only lines whose catalogue prints a flow figure the estimator can use are offered. The others are listed under the result.
Unit: cP

Water at 20 °C is about 1 cP. For cSt, multiply by the density in g/cm³ (see the unit converter).

Unit: elements

Gives the number of elements that keeps the clean stage at or below it.

First estimate

Enter the flow to see the estimate.

A first estimate, not a design. Confirm with an application engineer before you buy or install.

Catalogue figures for Clarypleat PES

Catalogue limits
Maximum differential pressure, forward5.2 bar at 25 °C
Maximum operating temperature80 °C continuous

Source: Clarypleat PES catalogue (Aug 2026), flow rate versus differential pressure chart, page 5; areas and limits, page 4.

How it is calculated

Clean pressure drop = slope from the catalogue chart (mbar per L/min for one one 10" element, water at 1 cP) × flow per element × viscosity in cP × length factor.

Flow per element = required flow ÷ elements in parallel. Elements for a limit = the smallest whole number that keeps the clean pressure drop at or below the limit.

Assumptions: the flow divides evenly between elements; pressure drop rises in a straight line with flow and with viscosity, as the catalogue states for liquids other than water; the housing's own pressure drop is not included. Dirt raises the pressure drop from the first hour of service.

Other lines

The estimator offers only lines whose catalogue prints a flow figure it can use as it stands. For any other line, send the duty and an application engineer will size it.

Kryticalpleat PES; Clarypleat PVDF; Clarypleat HE; Clarypleat NE; Clarywound 3X, Extreme, Ultra; RO Protect Eco; RO Protect Eco Plus; RO Protect Ultra; RO Protect Extreme; ClaryFlow Big Buddy; Lenticular depth filters; Clarywound CPU and Clarypleat CPU; Clarypleat 5000, Kryticalpleat all-fluoropolymer, RO Protect Prime, sintered lines, housings.

Ask an application engineer

Your result is put into the message for you to check and edit. An application engineer will reply by email.

By sending this you agree to our Privacy notice.

Request a catalogue

Tell us who you are and where to send it. Our team emails the catalogue to you.

By sending this you agree to our Privacy notice.