Random Fibre Filter Manufacturer and Suppliers - GopaniGopani Product Systems Private Limited

Random Fibre Filters are produced from randomly laid metal fibres which are sinter-bonded to form a uniform high-porosity filter medium. These filters have thicker media, so despite being surface filters, they offer depth filtration to an extent. Hence, they are good at trapping gels and agglomerates.

Features and Benefits

They are available in different grades of stainless steel.
Good permeability.
Broad range of pore sizes.
High tensile strength.

Applications

Chemical/Petrochemical Filtration
Pharmaceutical
Food and Beverages
Refinery
Power generation
Electronics
Textile

Specifications

Materials
Filter Media/Support/Hardware
Stainless Steel (304, 304L, 316, 316L), Inconel®, Hastelloy®, Monel®, Others on request.
O-ring
Silicon , Viton* , Buna-N , EPDM, PTFE
Retention rating
0.5, 1, 2, 5, 10, 20, 50, 100 and 200 μm
Filter Media Type
Random Metal Fibers
Filter Element Design
Pleated, Wrapped (Cylindrical)
Dimensions (nominal)
Length
10”, 20”, 30”, 40”, 50” (Others on request)
Diameter
Standard 2.5 inch (65 mm) (Others on request)
End Connection Type
DOE, SOE (222/Fin, 226/Fin, 222/Flat, 226/Flat), Thread (M20, M30, M40, NPT, BSP, BSPT) (Others on request)
Maximum operating conditions
Maximum forward operating pressure
1.5 MPa (15 bar) to 2.5 MPa (25 bar)
Maximum reverse differential pressure
0.3 MPa (3 bar) to 0.9 MPa (9 bar)
Maximum operating temperature
From -192oC to 350°C (seal M.O.C dependant)

Clarycarb Activated Carbon Blocks

These filter cartridges are produced solely from activated carbon and are also referred to as activated carbon blocks. Meticulously sourced superior quality coconut shell is uti...

Know More