Clarysynt Multi-layered Mesh Cartridge Filters ManufacturerGopani Product Systems Private Limited

These filters have multiple layers of wire mesh. While single-layered wire mesh filter is an ideal solution for various challenges, it has a limitation to the porosity it can offer. So, in the situation where wire mesh filters are required with lower micron ratings, multi-layered wire mesh is the solution. The multiple layers are bonded together to enhance the retention of particulates.

Features and Benefits

They are available in different grades of stainless steel.
Broad range of pore sizes.
Good permeability.
High tensile strength.

Applications

Chemical/Petrochemical Filtration
Pharmaceutical
Food and Beverages
Refinery
Power generation
Electronics
Textile

Specifications

Materials
Filter Media/Support/Hardware
Stainless Steel (304, 304L, 316, 316L), Inconel®, Hastelloy®, Monel®, Others on request.
O-ring
Silicon , Viton* , Buna-N , EPDM, PTFE
Retention rating
0.5, 1, 2, 5, 10, 20, 50, 100 and 200 μm
Filter Media Type
Multilayered Mesh
Filter Element Design
Pleated, Wrapped (Cylindrical)
Dimensions (nominal)
Length
10”, 20”, 30”, 40”, 50” (Others on request)
Diameter
Standard 2.5 inch (65 mm) (Others on request)
End Connection Type
DOE, SOE (222/Fin, 226/Fin, 222/Flat, 226/Flat), Thread (M20, M30, M40, NPT, BSP, BSPT) (Others on request)
Maximum operating conditions
Maximum forward operating pressure
1.5 MPa (15 bar) to 2.5 MPa (25 bar)
Maximum reverse differential pressure
0.3 MPa (3 bar) to 0.9 MPa (9 bar)
Maximum operating temperature
From -192oC to 350°C (seal M.O.C dependant)

Clarycarb Activated Carbon Blocks

These filter cartridges are produced solely from activated carbon and are also referred to as activated carbon blocks. Meticulously sourced superior quality coconut shell is uti...

Know More